iMS Motion Solution (Johor) Sdn Bhd
7, Jalan Sasa 4,
Taman Gaya,
81800 Ulu Tiram,
Johor, Malaysia.
+607-8635240
+607-8637240
1700-818-330 (Hotline)
+60167336610

Torque Meter

Our torque sensors are used to detect torque applied to rotating shafts, mainly used for testing motors, engines, and other rotary components. Those are available in wide capacity ranges from 0.05Nm to 10000Nm, and we have drip-proof type as well. We also offer various instruments for monitoring torques, including (but not limited to) a USB interface for PC connection, digital indicators to monitor torque, rotation speed, and power simultaneously, and a power and energy monitor for motor test benches.

UTM

・ Slip-ring-less = maintenance-free. rotating torque meter

・ Analogue bandwidth 1kHz with high speed sampling rate of 6kHz.

・ Measurement range 0.05Nm,0.1Nm,0.2Nm,0.5Nm,1Nm,2Nm,5Nm,10Nm,20Nm,50Nm,100Nm,200Nm,500Nm,1000Nm,2000Nm,5000Nm,10000Nm

・ Noise immunity has been greatly improved.

 

 

 

 

UTM II(W)/UTM II(WR)

・ Ideal torque meter for torque monitoring of screwdriving machines and power tools such as nutrunners

・ Prevent damage due to insufficient or excessive tightening

・ Torque monitoring : UTM址쮅), Torque+Angle monitoring : UTM址쮅R)

・ Capacity: 100Nm or 500Nm

 

 

 

 

UTMV

・With the protection against rain and seawater, it can be used outside for wind and water turbine and so on.

・Capacity type: 0.1,0.5,1, 5, 10, 50, 100, 500, 1000, and 5000Nm type will be available in near future)

・ Analogue bandwidth 1kHz with high speed sampling rate of 6kHz.

・ Safe overload: 500%

 

 

 

 

UCM/UCS

UTM瑨책ゥ책婁蔚澄

・ Couplings for UTM/UTMV

・ Connecting to external shafts accurately

・ Preventing rotational resonance, and improving accuracy of torque measurement (rubber type)

 

 

 

 

 

TM700

TM700

・ Torque monitor for UTM/UTMV.

・ Display the curves of torque, rotation speed, and power.

・ Operation power can be supplied to the UTM/UTMV (and to the optional rotary encoder as well).

・ Enable the cogging torque measurement with UTMII/UTMV.

・ Easy connection to UTM/UTMV with one cable.

 

 

 

TM500

TM500

* Torque monitor for UTM/UTMV

* Suitable for low-speed rotation and direct-acting applications.

* Data are recorded on SD cards.

* Operation power source can be supplied to the UTM/UTMV. (also to an optional rotary encoder)

* Easy connection to UTM/UTMV with one cable.

 

 

 

TM400

* Torque monitor for UTM/UTMV.

* With the built-in battery, it can be operated even without power source.

* Ideal for use with UTM (square shaft) series with the high-speed sampling at 20kS/s.

* Operation power can be supplied to the UTM/UTMV(and also to an optional rotary encoder).

* Easy connection to UTM/UTMV with one cable.

 

 

 

TM301

* Torque monitor specialized for UTM/UTMV

* Torque, rotation speed and power are displayed simultaneously

* Hold function (Sample, Peak, Valley, P-P, Average)

* Upper/lower comparators function ((ALM HI, HI, OK, LO, ALM LO)

* Data storage function

* Easy connection to UTM/UTMV with one cable

 

 

TM201

* Variations of torque, rpm, and power can be monitored and saved on PC.

* Maximum, minimum, and average value can be displayed.

* Measurement (numeric) data is automatically saved in CSV format.

* The unit supplies operation power to UTM/UTMV.

* Two cables are attached: one for UTM/UTMVand the other for PC.

 

 

 


Rotating torque meter with square drive UTM II(W)/UTM II(WR)

     
RM 0.00Add to Cart     

Our Agency Product Brands
  

You have 0 items in you cart. Would you like to checkout now?
0 items
Switch to Mobile Version
available in
Recent Updates
Subscribe Newsletter
1
Hello! Thanks for visiting my site. Please press Start button to Contact with Admin :)

Start