.jpg)
iMS Motion Solution (Johor) Sdn Bhd
7, Jalan Sasa 4,
Taman Gaya,
81800 Ulu Tiram,
Johor, Malaysia.
7, Jalan Sasa 4,
Taman Gaya,
81800 Ulu Tiram,
Johor, Malaysia.
+607-8635240
+607-8637240
1700-818-330 (Hotline)
+60167336610
Latest News
Higher Precision Motion Control with Autonics Closed Loop Stepper System
Jan 18, 2022
View Full Size
Closed Loop Stepper System consist of motors with integrated encoders for feedback and higher precision control
support offers high compatibility between primary and secondary devices with EtherCAT open protocol. The motor system can control motion of multiple axes simultaneously with 100 Mbps communication speed. The AC powered motor system can maintain higher torque during high speed drive compared to DC type motors and do not require separate switching mode power supplies
All new Autonics CX Series - LCD Display Counter/Timers
Dec 9, 2021
View Full Size
The CX series counter/timers feature LCD displays with easy-to-read white PV characters. The 11-segment display can display various alphanumeric characters for easier status readings. Users can switch between counter and timer modes for flexible application depending on requirements. The compact 64.5 mm rear-length size allows flexible installation in limited spaces. The units are available in selectable voltage input (PNP) / no-voltage input (NPN) type and universal voltage input types.
DOBOT MG400 DESKTOP COLLABORATIVE ROBOT
Nov 16, 2021
View Full Size
DOBOT MG400 is a lightweight desktop robot with a footprint smaller than one piece of A4 paper. Designed to be flexible to deploy, easy to use, and safe to collaborate, MG400 makes automation affordable and accessible for diversified and small-batch production scenarios. Featuring 750g payload, 440mm maximum reach, hand guidance and collision detection, MG400 is truly a perfect fit for lightweight desktop industrial applications that requires fast deployment and changeover.
Navigating the Food & Beverage Industry with Festo : "Filling Process in Focus"
Nov 11, 2021
View Full Size
Navigating the Food & Beverage Industry with Festo :
''Filling Process in Focus''
LIVE WEBINAR ON
17 NOVEMBER 2021 | 10.30~11.45AM
LIVE WEBINAR ON
17 NOVEMBER 2021 | 10.30~11.45AM
With an increasing consumption of packaged food, there is a need to improve the filling system with the latest technology. Filling systems provide accurate and uniform fill volumes and drip-free cutoff that reduce waste, spillage and cleanup costs. In Festo, we have the right products technology for you to automate the filling process while maintaining quality and safety
Speakers
• Mr. Kantaprat Sirasittiwat, Food & Packaging Application Engineer (SEA), Festo Thailand.
Kantaprat has 10 years’ of working and knowledge experience in the food and packaging, 5 years’ in semiconductor and 15 years’ in the field automation industries.
• Mr. Kantaprat Sirasittiwat, Food & Packaging Application Engineer (SEA), Festo Thailand.
Kantaprat has 10 years’ of working and knowledge experience in the food and packaging, 5 years’ in semiconductor and 15 years’ in the field automation industries.
• Mr. Kua Cha Ming, Industries Segment Manager, Food and packaging, Festo Malaysia
With 10 years of sales experience with Festo in various industries segment, Kua had the experience of handling both projects and sales in F&P applications such as End line packaging.
With 10 years of sales experience with Festo in various industries segment, Kua had the experience of handling both projects and sales in F&P applications such as End line packaging.
For more details:
https://www.ims.com.my/
iMS Motion Solution (Johor) Sdn Bhd
Tel: +607-8635240
Email: info@ims.com.my
#imsmotionsolution #IMS #festo
https://www.ims.com.my/
iMS Motion Solution (Johor) Sdn Bhd
Tel: +607-8635240
Email: info@ims.com.my
#imsmotionsolution #IMS #festo
DOBOT ROBOT ARM SERIES now available on IMS Motion Solution !!
Oct 21, 2021
View Full Size
DOBOT MG400
is a lightweight desktop robot with a footprint smaller than one piece of A4 paper. Designed to be flexible to deploy, easy to use, and safe to collaborate, MG400 makes automation affordable and accessible for diversified and small-batch production scenarios. Featuring 750g payload, 440mm maximum reach, hand guidance and collision detection, MG400 is truly a perfect fit for lightweight desktop industrial applications that requires fast deployment and changeover.
DOBOT M1
is a cost-effective intelligent robotic arm for light industry. With high precision, wide working range, complete functions and secondary development, it provides users more ways to use. M1 can realize multiple functions of assembly line work such as soldering, visual recognition and PCB plug-in, helping to construct the intelligent industrial system.
-Space Saving
-Professional Performance
-Simple & Flexible
-Safe & Collaborative
New product coming to IMS Motion Solution!!!
Oct 6, 2021
View Full Size
.jpg)
DIGITAX SF, LOW POWER, EASY TO USE, SERVO SOLUTIONS!
Nidec AC Drives, Servo Motor
50 W – 2 kW 200 V (single phase <1 kW)
Analog or pulse interface
17 bit absolute encoder (single or multi-turn)
• High performance servo control
• Easy set-up, tuning and state monitoring with
SF Connect
• Advanced damping and resonance suppression with notch
filters and FFT analysis
Fast, safe and easy to use
Rotational speed 2000 / 3000 r/min;
Motor Enclosure rating: IP65 or IP67;
Built-in keypad with 6 digit 7-segment status display for easy startup, parameter setting, and tuning;
The versatile analog or pulse train interface, offers easy integration with any PLC or motion controller
Can also operate standalone using the on-board 16-point positioning table;
PC-USB interface for parameter settings, tuning, and status display in the dedicated software Digitax SF Connect.
Autonics : 16 mm Control Switches S/L Series
Sep 14, 2021
View Full Size
-
Autonics : 16 mm Control Switches S/L Series - Compact, space-saving 16 mm installation diameter
- Short rear-length size of only 29.5 mm
- Independent detachable contacts
Check out AUTONICS NEW PRODUCT!!! BUP-30-E, Elevator U-Shape sensor with special connector
Aug 20, 2021
View Full Size
Check out AUTONICS NEW PRODUCT!!!
BUP-30-E, Elevator U-Shape sensor with special connector.
Sensing type : Through-beam type
Sensing Cannel : 1-channel
Sensing distance : 30mm
Sensing target : Opaquematerial of min. Ø4mm
Light source : Infrared LED(940nm)
Power supply : 12-24VDC ±10%(ripple P-P: max. 10%)
Operation mode : Light ON/Dark ON(set by control wire)
Control output : NPN open collector
For more details:
iMS Motion Solution (Johor) Sdn Bhd
Tel: +607-8635240
Email: info@ims.com.my
PS08-2.5DN, 8mm Square proximity sensor
Aug 20, 2021
View Full Size
Check out AUTONICS NEW PRODUCT!!
PS08-2.5DN, 8mm Square proximity sensor
Wire type and power : DC 3-wire type 12-24VDC
Sensing distance : 2.5mm
Standard sensing target : 8×8×1mm(iron)
Response frequency : 1kHz
For more details:
iMS Motion Solution (Johor) Sdn Bhd
Tel: +607-8635240
Email: info@ims.com.my
Festo Virtual Hannover Messer April 12 - 16, 2021
Mar 24, 2021
View Full Size
Every year, you will find Festo at many trade fairs around the world. Find out here about the latest trends in automation in the world of factory and process automation as well as technical education.
“With the theme ‘Home of Industrial Pioneers, the most important industrial trade fair in the world is taking place from 12 to 16 April 2021 - digital.”
The tour will take ''45 minutes'' and will be held via GoToWebina，
you and your customer have the possibility to stay in the meeting and continue your discussion as well as offer a 360° overview of the booth to discuss particular products。
For register PLS send us information （via March 24 - April 9, 8.30am - 6pm）about the desired language (English / Chinese) ,you name (or number of 1:1 or 1group), registered DAY and TIME, also The sales engineer will be invited as ''organizer'' in order to be able to moderate the session after the tour.
Last we offer in total 27 sessions from Monday afternoon to Friday
Distributor Sales Achieve Award 2019
Jul 22, 2020
View Full Size
Thank you for all the support from our VVIP customers to make us success !
It is REAL! Experience the first Festo Virtual Exhibition. On the 15th and 16th July 2020
Jul 10, 2020
It is REAL! Experience the first Festo Virtual Exhibition. On the 15th and 16th July 2020
Click the below for online registration
https://festo.6connex.eu/event/online/loginClick the below for online registration
___Revised_(002).png)
iMS appointed as FESTO Distributor
Apr 5, 2019
View Full Size
We are proudly announce that iMS Motion Solution (Johor) Sdn Bhd been appointed as Distributor of FESTO MALAYSIA.
Renew & upgraded to ISO9001:2015
Sep 14, 2018
View Full Size
This is to inform that we are certified under ISO9001:2015
.jpg)
We are relocated to our New Office
Jul 24, 2018
View Full Size
** Relocated to New Office **
To Whom It May Concern,
Our office was relocated to address below :
No.7, Jalan Sasa 4, Taman Gaya, 81800 Ulu Tiram, Johor.
TEL: 07-8635240
FAX : 07-8637240
Mobile : +6019-6774477
Email : info@ims.com.my
HOTLINE : 1700-810-330
www.ims.com.my
Whatsapp us now for your enquiries !
Jun 19, 2018
View Full Size
.jpg)
Whatsapp us now !
Dear Valued Supporter, you are welcome to whatsapp us your enquiries via whatsapp messenger.
https://api.whatsapp.com/send?phone=60196774477&text=iMS-online-
| Our Agency Product Brands |