iMS Motion Solution (Johor) Sdn Bhd
7, Jalan Sasa 4,
Taman Gaya,
81800 Ulu Tiram,
Johor, Malaysia.
+607-8635240
+607-8637240
1700-818-330 (Hotline)
+60167336610

Policies

 

Festo

FESTO is more than a manufacturer of process control and factory automation solutions, Pneumatic and electric automation products from actuators to servo motors to sensors and valves.
FESTO automation technology and technical educational solutions to more than 35 industries.
iMS Authotized Distributor of FESTO in Malaysia.

Pneumatic drives

= Core product range
  Print  
Cylinders with piston rod
Core product range
 
  • Cylinder with piston rod: as a compact cylinder, short stroke cylinder, flat cylinder, round cylinder, miniature cylinder, cartridge cylinder or stainless steel cylinder
  • Specified types in accordance with the ATEX directive are suitable for explosive atmospheres or are made of corrosion resistant stainless steel and therefore particularly easy to clean.
 
Rodless cylinders
Core product range
 
  • Compact linear drives with or without guide: mechanically coupled cylinders with optimised mounting options for simple mounting and magnetically coupled cylinders for use as a pressure-tight and zero-leakage system.
 
Semi-rotary drives
Core product range
 
  • Compact semi-rotary drives with small fitting space and adjustable swivel angles, also modular as twin piston rotary drive
  • Selected types are suitable for potentially explosive atmospheres, as per ATEX-guidelines.
 
Tandem, high-force and multi-position cylinders
 
  • More thrust than conventional cylinders by connecting in series 2, 3 or 4 cylinders with the same piston diameter and the same stroke.
  • By connecting 2 to 5 cylinders in series with the same piston diameter and different stroke lengths, up to 6 positions can be approached. .
 
Drives with guides
Core product range
 
  • Drives with slide, rod guides or precision piston rod guide.
 
Stopper cylinders
 
  • For stopping or separating when transporting workpiece carriers or pallets – smooth, quiet and safe stopping.
  • Fast and simple set-up on transfer systems without compressed air.
 
Clamping cylinders
 
  • Compact cylinders without piston rod with membrane and a much shorter stroke than bellows cylinders.
  • Clamping system with pneumatic drive
 
Bellows and diaphragm drives
 
  • Rodless diaphragm drive: design consists of two metal plates with rolled in rubber bellows or hose.
 
Rotary indexing tables
 
  • Units for rotary indexing tasks at assembly and packaging machines and drilling stations, and for other applications with rotating movement of the workpiece or the tool.
 
Valve actuators for process automation
Core product range
 
  • Quarter turn actuators
  • Linear drives with and without displacement encoder
  • Measuring units for linear drives.
 
Shock absorbers
Core product range
 
  • Stroke 1.7 ... 60 mm
  • Max. energy absorption per stroke 0.005 ... 384 J
  • Cushioning adjustable, self-adjusting, flexible cushioning rings
  • Components for cushioning kinetic energy.
 
Classic
 
  • Product types for which modern alternatives now exist
 
Cylinder attachments and accessories
Core product range
 
  • Mounting components, attachment parts, piston rod attachments and guides for drives.
 

DSBC-100-200-PPVA-N3 FESTO CYLINDER

Cylinder Festo ADN-16-20-I-P-A

    
RM 0.00Add to CartRM 0.00Add to Cart    
 
 
 

Valves

= Core product range
  Print  
Electrically and pneumatically actuated directional control valves
Core product range
 
  • Standard directional control valves
  • Universal directional control valves
  • Application-specific directional control valves.
  • Electric or pneumatic actuation.
 
Mechanically and manually actuated directional control valves
 
  • Directional control valves with mechanical actuators such as stems, rollers, idle return rollers, swivel levers, whiskers etc.
 
Shut-off valves
Core product range
 
  • Shut-off valves
    • Non-return valves
    • Ball valves and shut-off valves
    • Quick exhaust valves
    • Logic valves
 
Pressure control valves
 
  • Pressure control valves with screw-in thread
    • Pressure regulators
    • Differential pressure regulators
 
Flow control valves
Core product range
 
  • Flow control valves
    • Time delay valves
    • Flow control valves
    • One-way flow control valves
 
Proportional valves
 
  • Proportional valves
    • Proportional pressure regulators
    • Proportional directional control valves
 
Electrically actuated process and media valves
Core product range
 
  • Process and media valves
  • Directional control valves electrically actuated, piloted, pneumatic spring return
 
Pneumatically and mechanically operated process and media valves
Core product range
 
  • Process and media valves
  • Butterfly valves
  • Angle seat valves
  • Ball valves
  • Proportional media valve
 
Piezo valves
 
  • Using piezo valves for pilot control ensures:
    • Pressure regulation functionality
    • Maximum service life
    • Minimal energy consumption
    • Low leakage when used as a proportional pressure regulator
 
Pneumatic control systems
 
  • Adding counters
  • Predetermining counters
 
Classic
 
  • Product types for which modern alternatives now exist
 
Accessories for valves
Core product range
 
  • Manifold block / manifold strips
  • Solenoid coils
  • Mounting attachments
  • Actuator attachments
  • Valve-specific accessories
 

VUVG-S18-M52-RT-Q6-5H2L-W1 FESTO SOLENOID VALVE

     
RM 0.00Add to Cart     

Compressed air preparation

= Core product range
  Print  
Service unit combinations
Core product range
 
  • Service units for preparing compressed air, consisting of different combinations of units in two series.
 
Filter regulator/lubricator
Core product range
 
  • Filter regulator
  • Lubricator
 
Filter-regulator units
Core product range
 
  • Space-saving design with filter and regulator integrated in a single unit
 
Filter
 
  • Filters for purifying compressed air in accordance with various quality classes
    • Standard filters
    • Fine filters
    • Micro-filters
    • Active carbon filters
 
Regulators
Core product range
 
  • Pressure regulators for compressed air preparation
    • Standard regulators with various pressure regulation ranges
    • Precision pressure regulators
    • Electrically controlled pressure regulators
    • Regulator manifolds
 
Lubricators
 
  • Lubricators for adding lubricant for pneumatic components to compressed air.
 
On-off valves and soft-start valves
Core product range
 
  • On-off valves for starting up and exhausting systems.Soft-start valves for gradual pressure build-up.
 
Air dryers
 
  • Adsorption dryer with defined pressure dew point and high flow rate, as well as membrane air dryer with flow rate-dependent pressure dew point.
 
Air distributor
Core product range
 
  • Branching modules and distributor blocks as an intermediate outlet for different qualities of compressed air
 
Condensate drain
 
  • Condensate drain for attachment to service units as well as compressed air networks and systems, for automatic discharge of accumulated condensate.
 
Pressure amplifiers
 
  • Greater energy efficiency thanks to reduced system pressure and targeted local pressure increase.
  • Components for boosting pressure within a subsection of a system.
 
Pressure indicators
 
  • Pressure displays for compressed air preparation.
 
Classic
 
  • Product types for which modern alternatives now exist
 
Accessories for compressed air preparation
Core product range
 
  • Mounting elements
  • Manifold blocks
  • Securing elements
  • Pressure indicators
  • Device-specific accessories.
 

FILTER REGULATOR MS6-LFR-1/2-D7-C-R-M-AS

FILTER REGULATOR MS4-LFR-1/4-D6-C-R-M-AS

    
RM 0.00Add to CartRM 0.00Add to Cart    

Pneumatic fittings system

= Core product range
  Print  
Tubing
Core product range
 
  • Tubing for a wide range of working environments, including for the food industry, flame-retardant, PWIS-free or media-resistant designs.
 
Fittings
Core product range
 
  • Line connector (fitting) and line connecting components with push-in and barbed fitting connection.
  • Typical shapes of push-in fittings and connectors include straight, L, T, X and Y.
  • Also includes special accessories such as blanking plugs.
 
Pipe
 
  • Polyamide, wrought aluminium alloy, polyethylene
  • Outside diameter 6 ... 28 mm
  • Operating pressure -0.95 ... 30 bar
  • Ambient temperature -30 ... 75 °C
  • Operating medium
    • Compressed air
    • Vacuum
    • Fluids
 
Push-in fittings for PQ tubes
 
  • Port G3/8, G1/2, G3/4, G1
  • Diameter 12, 15, 18, 22, 28 mm.
 
Couplings
Core product range
 
  • Self-closing connectors (always in combination: plug and socket)
 
Distributors
 
  • Connector with one connection and more than two outputs, except for push-in X-connectors.
 
Protective conduit systems
 
  • Protective conduits and accessories for protective conduit systems.
 
Accessories for pneumatic fittings system
 
  • Components for supply lines and line connectors with autonomous functions such as blanking plugs, double nipples, tubing cutters, ...
 

Qs-1/8-6 festo-pneumatic-straight-threaded fitting

PUN-H-10X 1,5-TBL Festo Plastic Tubing

    
RM 0.00Add to CartRM 0.00Add to Cart    

Our Agency Product Brands
   

You have 0 items in you cart. Would you like to checkout now?
0 items
Switch to Mobile Version
available in
Recent Updates
Subscribe Newsletter
1
Hello! Thanks for visiting my site. Please press Start button to Contact with Admin :)

Start