FS2000 Digital indicator with SD card slot & high sampling rate

FS2000 Digital indicator with SD card slot & high sampling rate　

Category: Controller

Quantity:

Product outline

The best solution for OK/NOK judgment of press fitting and caulking application !! High responsiveness of 5kHz to fully utilize the performance of Super Cell !!

A fluctuation of force is shown as a waveform.

FS2000 is a digital indicator integrated with a strain gauge sensor that can display physical quantities such as pressure, load and torque in waveforms. It is able to visually capture in waveforms the fluctuations in physical quantities which are difficult to capture by only numerical values. With a 25000 times per second for high-speed processing, it is also ideal for narrow value fluctuations and comes equipped with a HI/LO limit comparison function, various hold functions and judgment function. FS2000 can be used in a wide-range of applications such as in control systems used in production control, automatic devices or testers.

OK/NOK judgment with 2ch sensor inputs !!

Two-dimensional OK/NOK judgement can be performed with a load cell and displacement sensor.

Comparison & hold function by waveform display

■ Waveform comparison

This function compares the actual measurement waveform against the setup High/Low limit waveforms and will give out an NOK judgment when any of the point exceeded the preset High/Low limit waveforms.

■ Multi-point judgment

OK/NOK judgment can be performed on multi points in one process. (e.g. The start point and end point of press fitting can be judged respectively.)(Max. 5 points)

Improved usability

4.3 inch wide display provides excellent visibility.

Main display configuration can be selected to keep it as simple as possible by eliminating unnecessary information.

Changed setting items are highlighted!

Master and current set values are listed up for checking the changed setting items easily.

Set values can be edited directly on the list without going into each setting menu.

* Except for waveform comparison settings.

Trend display is helpful for preventive maintenance

Trend of the zero-point shift and hold values can be monitored to find any irregularities for preventing breakdown of machines.

In addition, the master settings can be registered so that operator can compare with the current settings to see if there are any differences.

Specifications

Sensor input（Standard）｜Sensor input（Multisensor input：MLT）｜Analog voltage output｜Display section｜COMP. & JUDGE. function｜Preventive maintenance support｜External signal｜Interface｜General performance｜Attachments

Sensor input
Sensor input for load (Fixed as strain gauge input)(6-wire)
Excitation voltage	DC 2.5, 5, 10V±10% (depending on settings) Output current: Within 30mA
Signal input range	-2.0mV/V to +2.0mV/V
Accuracy	Non-linearity: Within 0.02%/FS ±1 digit (at 2.0mV/V input) Zero drift: Within 0.1μV/℃ RTI Gain drift: Within 15ppm/℃
Low-pass filter	Selectable from 10 to 10kHz（at A/D converter speed 25000 times/sec） Selectable from 2 to 2kHz（at A/D converter speed 5000 times/sec）
A/D converter	Speed: Selectable from 25000 times/sec., 5000 times/sec. Resolution: 24bit (binary)
Sensor input for displacement Pulse input(Line driver)
Max. input frequency	1MHz
Internal count range	Approx. 1,000,000
Adaptable rotary encoder	Output: Incremental type 2-phase output (A/B signal output) Also capable of single-phase output (A-phase input used. All pulses are counted as in the plus direction.) Output stage circuit specification: Line driver (Based on RS-422)

Sensor input（Multisensor input：MLT or MLT2）
Sensor input for load (Fixed as strain gauge input)(6-wire)
Excitation voltage	DC 2.5, 5, 10V±10% (depending on settings) Output current: Within 30mA
Signal input range	-2.0mV/V to +2.0mV/V
Accuracy	Non-linearity: Within 0.02%/FS ±1 digit (at 2.0mV/V input) Zero drift: Within 0.1μV/℃ RTI Gain drift: Within 15ppm/℃
Low-pass filter	Selectable from 10 to 10kHz（at A/D converter speed 25000 times/sec） Selectable from 2 to 2kHz（at A/D converter speed 5000 times/sec）
A/D converter	Speed: Selectable from 25000 times/sec., 5000 times/sec. Resolution: 24bit (binary)
Sensor input for displacement Pulse input (Open collector)[MLT]
Max. input frequency	1MHz
Internal count range	Approx. 1,000,000
Adaptable rotary encoder	Output: Incremental type 2-phase output (A/B signal output) Also capable of single-phase output (A-phase input used. All pulses are counted as in the plus direction.) Output stage circuit specification: Open collector (built in pull-up resistor)
Sensor input for displacement Pulse input(Line driver)[MLT2]
Max. input frequency	1MHz
Internal count range	Approx. 1,000,000
Adaptable rotary encoder	Output: Incremental type 2-phase output (A/B signal output) Also capable of single-phase output (A-phase input used. All pulses are counted as in the plus direction.) Output stage circuit specification: Line driver (Based on RS-422)
Voltage input
Signal input range	－10 to ＋10V
Input impedance	App. 1MΩ
Accuracy	Non-linearity:Within 0.02%/FS ±1 digit (at 10V input) Zero drift:Within 0.2mV/℃ RTI Gain drift:Within 0.01%/℃
Low-pass filter	Selectable from 10 to 10kHz（at A/D converter speed 25000 times/sec） Selectable from 2 to 2kHz（at A/D converter speed 5000 times/sec）
A/D converter	Speed:Selectable from 25000 times/sec, 5000 times/sec Resolution:24bit Effective Resolution: Approx. 1/20000 against 10V

Analog voltage output	Output level: Approx. 2V per 1.0mV/V input Load resistance: 2kΩ or more

Display section
Display	4.3 inch TFT color LCD module Display area: 95.0(W)×53.9(H) mm Dot configuration: 480×272 dot
Display frequency	Fixed at 3 times/sec.

COMP. & JUDGE. function
Multi point comparison mode 16ch (setting values can be stored)	Capable of judging up to 5 hold points at the same time. Sample, Peak, Bottom, P-P, Relative Maximum, Relative Minimum, Inflection Point, Average, End
Waveform comparison mode 16ch (setting values can be stored)	Compares the actually measured waveform against the preset Hi/Lo waveforms. The overall measured waveform will be compared against the preset Hi/Lo and if any of its points exceeds the preset waveform, then the measured waveform will be NOK.

Preventive maintenance support
Trend display	Showing the trend of measurement data to help finding irregularities at early stage.
Statistics	Using the latest 10000 measured data. Displaying number of measurement, OK, NOK
Screen capture	Saves screen capture data as bmp data.
Work name edit	Work name can be edited and displayed for each Work No..
Setting list display	Changed setting items comparing to master set values are highlighted.
User management	Login ID and Password

External signal
Output signal	16 points Hold judgment (load, displacement)/ Load overload/ Measurement complete/ Waveform comparison judgment/ Load & displacement OK/ CPU OK/ SD card OK/ Timing output 1,2 Output Type: Sink type/source type selectable. (Source Type is option: [ISC]) Output transistor ON at signal ON. To connect an input unit like a PLC, connect plus common for sink type, and minus common for source type. Rated voltage: 30V Rated current: 30mA
Input signal	16 points Load digital zero/ Displacement adjustment/ Measurement start/ Measurement end/ HOLD1 to 5/ Reset/ Forcibly light up the backlight/ Touch panel lock/ Work change Input type: Plus common/Minus common selectable. (Minus common is option: [ISC]) To connect a transistor, connect NPN output type (sink type) for plus common and PNP output type (source type) for minus common.

Interface Only one option can be installed.
USB	USB interface
ODN	DeviceNet interface (option)
CCL	CC-Link interface (option)
EIP	EtherNet/IP interface (option)

General performance
Power supply voltage	DC24V (±15%)
Power consumption	6W typ
Operation condition	Operation temperature: -10℃ to +40℃/ Storage temperature: -20℃ to +60℃ Humidity: 85% RH or less (non-condensing)
Dimensions	132(W)×98(H)×110(D) mm (Projections excluded)
Weight	Approx. 1.0kg

Attachments
I/O connector (with cover)	1
Analog connector	1
Operating tool	1
SD card	1
Operation manual	1
DeviceNet connector (when DeviceNet option is selected)	1
CC-Link connector (when CC-Link option is selected)	1

Option

Model
ISC	I/O source board
MLT	Multisensor input
MLT2	Multisensor input
ODN	DeviceNet interface
CCL	CC-Link interface
EIP	EtherNet/IP interface

Optional accessories

Model
CN71	CC-Link connector
CN72	Double row connector for CC-Link
CN77	Analog connector
CND01	DeviceNet connector
SD1G	1 GByte SD card
SD2G	2 GByte SD card
SD16G	16 GByte SD card
SD32G	32 GByte SD card
CA81-USB	USB cable (A-miniB type) 1.8m
TSU03	DC lighting surge unit

iMS Motion Solution (Johor) Sdn Bhd (Company Registration 1098771-W)

No.7, Jalan Sasa 4,Taman Gaya, 81800 Ulu Tiram, Johor Bahru, Johor. Malaysia.

TEL:+607-8635240 FAX: +607-8637240

MOBILE: +6019-6774477

EMAIL: info@ims.com.my | WhatsApp | www.ims.com.my

HOTLINE : 1700-818-330

whatsapp us now !

Brand Name

| MOTION DEVICES SPECIALIST | SYSTEM and CONTROL INTEGRATION |

Return / Refund Policy :
All goods sold are not returnable & we accept goods ex-change with equal or lower value of good purchased. If the ex-change items are higher than purchased items, buyer shall top up the differential cost. All payment made are not refundable, please confirm the purchase items code & cost with our sales representative before place orders.

Shipping and Fulfillment :
Thank you for your purchase. Once we have confirmed your payment, we will prepare and ship out your order out within 24-48 hours.( For ex-stock items only, Indent items subject to delivery stated in quotation & conversation in emails). Once your order has been shipped out, you will receive an email notification with the tracking number and tracking details inside.

Private Policy
General Statement of Principles
As described in detail below, any information we gather at this web site is strictly for our use and is not shared with any other entity, public or private, for any reason - period. We will not sell or give away any lists or other data that we may retain and we do not purchase such information from other sources.
Statistical Data
Our servers (as most) track IP addresses and referring pages to help with site maintenance and improvements. This data is viewed only as anonymous statistics to show the busiest times of the day or week, pages with errors and how effective our advertising has been. This information is not used for any other purpose.
Personal Information Collected - Order Forms
With the exception of credit card info, we store the information from your order form to allow us to track consulting issues or refer to a previous order to help provide some customer service. You may elect to have your information completely removed from this system by e-mailing us at info@ims.com.my with your request. We do not store any type of sales information.
Information Correction or Removal
If you wish to correct, update or remove any information about you that may be in our records, please send us e-mail at info@ims.com.my with the details of your request. If you wish to contact us further, please find complete contact information on our contact page.
Cookies
Cookies are files with small amount of data, which may include an anonymous unique identifier. Cookies are sent to your browser from a web site and stored on your computer's hard drive. We use 'cookies' to store your cart contents for you. You can instruct your browser to refuse all cookies or to indicate when a cookie is being sent. However, if you do not accept cookies, you may not be able to use the checkout section of our site.

Changes To This Privacy Policy
This Privacy Policy is effective as of 1^st Jan 2019 and will remain in effect except with respect to any changes in its provisions in the future, which will be in effect immediately after being posted on this page.