|

Share:


F701-C Basic type with accumulation value display weighing controller

Contact Us

Quantity:

F701-C is a general-purpose weighing controller that is compatible with all weighing systems. This is a practical device excellent in cost effectiveness, which is equipped with the final discharge function allowing high-accuracy feeding and discharging weighing control and the weighing sequence function essential to hopper and packing scales.
Installable is the interface that can be connected to PLCs or various peripherals such as BCD output, RS-232C and CC-Link.

Analog section
Excitation voltage 10V DC ±5%, Output current; within 120mA
(Up to 4 loadcells at 350Ω are parallel-connectable)
Zero adjustment range 0 to 2mV/V
Rough adjustment: Digitally controlled via rough adjustment circuit
Fine adjustment: Auto adjusting method via digital processing
Gain adjustment range 0.3 to 3.2mV/V
Rough adjustment: Digitally controlled via rough adjustment circuit
Fine adjustment: Auto adjusting method via digital processing
Min. input sensitivity 0.3μV/count
Accuracy Non-linearity: within 0.01% FS
Zero drift: within 0.2μV/°C RTI
Gain drift: within 15 ppm/°C
Analog filter Bessel low-pass filter (-12dB/oct.),
Selectable from 2, 4, 6, 8 Hz
A/D converter Speed: 200 times/sec.
Resolution: 24 bit (binary)
 
Setting section
Setting items – High limit, Low limit, near zero, SP1, SP2, Compensation, over, under, final
・ Comparison inhibit time, judging time, complete output time, adjust feeding time, auto zero times, judging times. Auto free fall compensation regulation, analog filter, tare weight
・ Weighing function 1, weighing function 2, weighing function 3, sequence mode, function key inhibit, digital filter, motion detect, zero tracking period, zero tracking range
・ Balance weight value, capacity, min. scale division, net over, gross over, DZ regulation value, function selection, gravitation acceleration (area number input), gravitation acceleration (acceleration input)
・ D/A output mode, D/A zero output weight, D/A full scale, RS-485 I/F, ID number, RS-232C I/F, external function selection, setting value LOCK, restriction on the tare subtraction function
・ Input selection, output selection, CC-Link I/F Occupied station & Transmission speed, CC-Link I/F Station No.
・ Average weight, maximum weight, minimum weight, population standard deviation, sample standard deviation, number of data (n), latest accumulation date, Maximum-minimum (R), option substrate
・ Span calibration, equivalent input calibration, password input, zero calibration
 
I/O section
External input signal ・ ON when shorted to COM terminal by contact (relay, switch) or non contact (TTL-level transistor or open collector output)
・ G/N, digital zero, tare subtraction ON, tare subtraction OFF, hold*, judge*, feed / discharge, start*, stop*, accumulation command*, accumulation clear*
* Signals for selection. Up to 4 can be selected.
External output signal ・ Transistor’s open collector output (Emitter = COM terminal); Output is LO when transistor is ON.
・ Near zero, SP1, SP2, SP3, under, over, Low limit, high limit, stable, weight alarm or error, go or complete, run or accumulation error
Interface ・ SIF: 2-wire type serial interface (standard); Interface to link with Unipulse printer or external display
・ 232: RS-232C communication interface (standard): Write (change)/read weight data, various statuses and setting values by commands from a host computer
・ BCO: BCD parallel data output interface (Optional): Parallel interface to transmit weight data to various peripherals
・ 485: RS-485 communication interface (Optional): Allows longer-distance communication than RS-232C. ID numbers are set, and multiple units of F701-C are parallel-connectable.
・ DAC: D/A converter interface (Optional); Interface to convert weight data to current signal and output it.
・ CCL: CC-Link interface (Optional); Links directly to PLC.
 
Display section
Display unit Numerical display (7 digits) with a character height of 10.4 mm by fluorescent display tube, Sub-display; character height 4.0 mm
Display value 5 digits, Sign; Minus sign displayed on most significant digit
Unit Selectable from t, kg, g, N, lb, none
Status display SP1, SP2, SP3, NEAR ZERO, HOLD, ZERO ALARM, STAB, TARE, NET, ZERO, BATTERY CONDITIONS
 
General performance
Power supply voltage 100 to 240V AC (+10% -15%) (Free power supply 50/60 Hz)
Power consumption Approx. 15VA
Operating conditions Temperature: Working temperature range -10 to +40°C;
Storage temperature range -20 to +85°C
Humidity: 85% RH or less (non-condensing)
Dimensions 144(W)×72(H)×160(D) mm (protruding parts not included)
Weight Approx. 1.0kg
 
Attachments
AC input cord (nominal rating: 125V) 3m 1
Mini-driver 1
FCN series I/O connector (with cover) 1
Jumper cable 2
Operation Manual 1
BCD output connector (when BCD output option is installed) 1
RS-485 connector (when RS-485 option is installed) 1
D/A converter connector (when D/A converter option is installed) 1
CC-Link connector (when CC-Link option is installed) 1


iMS Motion Solution (Johor) Sdn Bhd (Company Registration 1098771-W)
 
No.7, Jalan Sasa 4,Taman Gaya, 81800 Ulu Tiram, Johor Bahru, Johor. Malaysia.
TEL:+607-8635240 FAX: +607-8637240
MOBILE: +6019-6774477
EMAIL: info@ims.com.my | WhatsApp  | www.ims.com.my
HOTLINE : 1700-818-330
whatsapp us now !

Brand Name
MEISTER | GGM | Sanyo Denki | ElectroCraft | EDrive | SHIHLIN ELECTRIC | AUTONICS | UI Robot | Mitsubishi CNC | PANASONICApex Dynamics | NISSEI GTR | UNIPULSE | CREVIS
 
MOTION DEVICES SPECIALIST | SYSTEM and CONTROL INTEGRATION |
| Induction Motor | Speed Control Motor | Reversible Motor |Brake Motor |BLDC Motor |DC Motor |Planetary Gear Motor | Servo Motor | Stepping Motor | Linear Actuator Motor | Lead Screw Motor|Close Loop Stepping Motor | Customization Motors | Right Angle Gear Head | Precision Gear Reducer |PLC | Motion Controller |HMI /Touch Screen| Inverter |CNC Controller |Multi Axis Robots |IPC | SCADA |Monitoring Software | Embeded PC | Remote IO |TPC | Motion Card | Loadcell |PPC |
 
Return / Refund Policy : 
All goods sold are not returnable & we accept goods ex-change with equal or lower value of good purchased. If the ex-change items are higher than purchased items, buyer shall top up the differential cost. All payment made are not refundable, please confirm the purchase items code & cost with our sales representative before place orders.
 
Shipping and Fulfillment :
Thank you for your purchase. Once we have confirmed your payment, we will prepare and ship out your order out within 24-48 hours.( For ex-stock items only, Indent items subject to delivery stated in quotation & conversation in emails). Once your order has been shipped out, you will receive an email notification with the tracking number and tracking details inside.
 
Private Policy
General Statement of Principles 
As described in detail below, any information we gather at this web site is strictly for our use and is not shared with any other entity, public or private, for any reason - period. We will not sell or give away any lists or other data that we may retain and we do not purchase such information from other sources.
Statistical Data 
Our servers (as most) track IP addresses and referring pages to help with site maintenance and improvements. This data is viewed only as anonymous statistics to show the busiest times of the day or week, pages with errors and how effective our advertising has been. This information is not used for any other purpose.
Personal Information Collected - Order Forms
With the exception of credit card info, we store the information from your order form to allow us to track consulting issues or refer to a previous order to help provide some customer service. You may elect to have your information completely removed from this system by e-mailing us at info@ims.com.my with your request. We do not store any type of sales information.
Information Correction or Removal 
If you wish to correct, update or remove any information about you that may be in our records, please send us e-mail at info@ims.com.my with the details of your request. If you wish to contact us further, please find complete contact information on our contact page.
Cookies
Cookies are files with small amount of data, which may include an anonymous unique identifier. Cookies are sent to your browser from a web site and stored on your computer's hard drive. We use 'cookies' to store your cart contents for you. You can instruct your browser to refuse all cookies or to indicate when a cookie is being sent. However, if you do not accept cookies, you may not be able to use the checkout section of our site.
 
Changes To This Privacy Policy
This Privacy Policy is effective as of 1st Jan 2019 and will remain in effect except with respect to any changes in its provisions in the future, which will be in effect immediately after being posted on this page.

Specifications

Sorry, currently do not have any product specifications
Sorry, currently do not have any video uploaded.
Sorry, currently do not have any file for download.