.jpg)
iMS Motion Solution (Johor) Sdn Bhd
7, Jalan Sasa 4,
Taman Gaya,
81800 Ulu Tiram,
Johor, Malaysia.
7, Jalan Sasa 4,
Taman Gaya,
81800 Ulu Tiram,
Johor, Malaysia.
+607-8635240
+607-8637240
1700-818-330 (Hotline)
+60167336610
Autonics Area Sensor BWP20-12 (Picking Sensor)
| Previous | 1 / 1 | Next |
Autonics Area Sensor BWP20-12 (Picking Sensor)
Specification Table
Wiring Connection:
iMS Motion Solution (Johor) Sdn Bhd (Company Registration 1098771-W)
Specification Table
| Model | NPN open collector output | BWP20-08 | BWP20-12 | BWP20-16 | BWP20-20 |
| PNP open collector output | BWP20-08P | BWP20-12P | BWP20-16P | BWP20-20P | |
| Sensing type | Through-beam | ||||
| Sensing distance | 0.1 to 5m | ||||
| Sensing target | Opaque materials of Min.ø30mm | ||||
| Optical axis pitch | 20mm | ||||
| Number of optical axis | 8pcs | 12pcs | 16pcs | 20pcs | |
| Sensing width | 140mm | 220mm | 300mm | 380mm | |
| Power supply | 12-24VDC ±10%(Ripple P-P : Max. 10%) | ||||
| Protection circuit | Includes | ||||
| Current consumption | Emitter: Max. 80mA, Receiver: Max. 80mA | ||||
| Control output |
NPN or PNP open collector output • Load voltage : Max. 30VDC • Load current : Max. 150mA • Residual voltage - NPN : Max. 1V, PNP : Min. 2.5V |
||||
| Operation mode | Light ON/Dark ON by switch | ||||
| Short-circuit protection | Built-in | ||||
| Response time | Max. 6ms(Frequency B selection is max. 7ms) | ||||
| Light source | Infrared LED(850nm modulated) | ||||
| Synchronization type | Synchronized by synchronous line | ||||
| Interference protection | Interference protection by transmission frequency selection | ||||
| Environ-ment | Ambient illumination | Sunlight : Max. 10,000㏓ (received light side illumination) | |||
| Ambient temperature | -10 to 55‘ζ, storage : -20 to 60‘ζ | ||||
| Ambient humidity | 35 to 85%RH, storage : 35 to 85%RH | ||||
| Noise resistance | ±240V the square wave noise (pulse width: 1㎲) by the noise simulation | ||||
| Dielectric strength | 1,000VAC 50/60Hz for 1minute | ||||
| Insulation resistance | Min. 20MΩ(at 500VDC megger) | ||||
| Vibration | 1.5mm amplitude or 300m/s2 at frequency of 10 to 55Hz(for 1 min.) in each of X, Y, Z directions for 2 hour | ||||
| Shock | 500m/s²(approx. 50G) in each of X, Y, Z directions for 3 times | ||||
| Protection | IP40(IEC standard) | ||||
| Material | Case : PC/ABS, Sensing part: PMMA | ||||
| Cable |
ø3.5, 4-wire, Length : 3m(Emitter : ø3.5, 4-wire, Length : 3m) (AWG 24, Core diameter : 0.08mm, Number of cores : 40, Insulator out diameter : ø1) |
||||
| Approval | CE | ||||
| Unit weight | Approx. 280g | Approx. 320g | Approx. 360g | Approx. 430g | |
Wiring Connection:
iMS Motion Solution (Johor) Sdn Bhd (Company Registration 1098771-W)
GST : 002050170880
No.9, Jalan Sasa 4,Taman Gaya, 81800 Ulu Tiram, Johor Bahru, Johor. Malaysia.
TEL:+607-8635240 , 8502660 FAX: +607-8637240
MOBILE: +6016-7336610 / +6019-7788660
EMAIL: enquiry-jb@ims-motion.com | SKYPE: dannylim330 |www.ims-motion.com
HOTLINE : 1700-818-330
Brand Name
| MEISTER | GGM | Sanyo Denki | ElectroCraft | EDrive | SHIHLIN ELECTRIC | AUTONICS | UI Robot | Mitsubishi CNC | PANASONIC | Apex Dynamics | NISSEI GTR | ADVANTECH |
| MOTION DEVICES SPECIALIST | SYSTEM and CONTROL INTEGRATION |
| Induction Motor | Speed Control Motor | Reversible Motor |Brake Motor |BLDC Motor |DC Motor |Planetary Gear Motor | Servo Motor | Stepping Motor | Linear Actuator Motor | Lead Screw Motor|Close Loop Stepping Motor | Customization Motors | Right Angle Gear Head | Precision Gear Reducer |PLC | Motion Controller |HMI /Touch Screen| Inverter |CNC Controller |Multi Axis Robots |IPC | SCADA |Monitoring Software | Embeded PC | Remote IO |TPC | Motion Card | EtherCAT Master Card |PPC |
| Our Agency Product Brands |