DOBOT MG400

DOBOT MG400 is a lightweight desktop robot with a footprint smaller than one piece of A4 paper. Designed to be flexible to deploy, easy to use, and safe to collaborate, MG400 makes automation affordable and accessible for diversified and small-batch production scenarios. Featuring 750g payload, 440mm maximum reach, hand guidance and collision detection, MG400 is truly a perfect fit for lightweight desktop industrial applications that requires fast deployment and changeover.

Single Axis Motion Controller

EDRIVE ED-SPC2 Single Axis Motion Controller

Motion Control System

Simple Motion Control System

Color Mark Sensors BC Series

How to make setting

Speed & Position Measurement

Speed & Position Measurement by Autonics

Stepper Motor Application

Low cost position control by stepper motor

Sensors Application Sharing

FA Automation Sharing

DOBOT | CR Collaborative Robot Series

features 4 cobots with payloads of 3kg, 5kg, 10kg, and 16kg. These cobots are safe to work alongside, cost-effective and adaptable to a variety of application scenarios. CR Cobots offer flexible deployment, single-hand guidance, collision monitoring, trajectory reproduction and many other functions, making it even more suitable for man-robot collaboration scenarios. For more details: https://www.ims.com.my/index.php?ws=ourproducts... iMS Motion Solution (Johor) Sdn Bhd Tel: +607-8635240 Email: info@ims.com.my #ims #imsmotionsolution #dobot #mg400 #xtstechnologies #xtstech #robotics #technology #automations #industry4_0 #factory #robotics #cobotics #collaborativerobots #industrialautomation #artificialintelligence #RobotArms #industrialrobots #smartfactory #robotweek #robotics #cobotics #collaborativerobots #industrialautomation #artificialintelligence #RobotArms #industrialrobots #smartfactory #automation #robots #cobotics #collaborativerobots #industrialautomation #artificialintelligence #RobotArms #industrialrobots #factoryautomation #ai #vision #WeldingRobot #Dobot #robotics #cobotics #collaborativerobots #artificialintelligence #RobotArms #industrialrobots #smartfactory #IO_Link #communication #smartsolution #adio #ethercat #ethernetip #profinet #atiolink

Autonics Tutorial | IO-Link System(ADIO, PRD-IL2 series)

※ Cable information Power cable : U78P-A5C-V010 Ethernet cable : M12C-LEC-V010 PDCT cable : BCC M415-U024-8F-696-VX04T8-018

DOBOT | CR10 collaborative robot

Festo | The MCS transport system

a cooperation between Festo and Siemens, fits perfectly into chain conveyor systems, such as the system from FlexLink. Colin shows us more about this today!

Festo Tutorial : HGPP: Replacing wearing parts

This tutorial is about replacing the wearing parts at the parallel gripper HGPP. -Parts list: products and tools -Demounting wearing parts -Mounting wearing parts This video shows the instructions at the following products as an example: - 187873 Parallel gripper HGPP-20-A, series 02/2022 - 673175 Set of wearing parts HGPP-20, series 06/2022

Pudu Robotics | BellaBot x Pudu Pager

Pudu Pager Solution supports calling of multiple Pudu delivery robots. In the manufacturing scenarios, it supports the expansion of multi-level gateways to complete full signal coverage in complex environments. Besides, it enables offline self-organizing network with strong anti-interference capability. With Pudu Pager, the robot can respond quickly to the task, greatly improving the work efficiency.

Dobot | robotics Loading and Unloading Collection

UNIPULSE | Force measurement demo #2. OK/NOK judgement by human senses

This time, we will judge OK/NOK by human senses. When pressing without a copy paper inserted in the workpiece: OK. When pressing with a copy paper inserted in the workpiece: NOK. The test operator is made blindfolded so that he cannot judge the results by visual sense For more details: https://www.ims.com.my/ iMS Motion Solution (Johor) Sdn Bhd Tel: +607-8635240 Email: info@ims.com.my

Dobot | Why do we need to automate welding?

Automated welding is precise and accurate and prevents injuries in the #manufacturing environment. It combats the challenges of manual welding, e.g., working in a hazardous environment, difficulty maintaining a high level of accuracy, and time and money wasted during downtime. #Robot welding is: 🔹 safe 🔹 accurate 🔹 cost-saving For more details: https://www.newpages.com.my/v2/en/company/727140/products/389818/DOBOT.html iMS Motion Solution (Johor) Sdn Bhd Tel: +607-8635240 Email: info@ims.com.my #ims #imsmotionsolution #dobot #mg400 #xtstechnologies #xtstech #robotics #technology #automations #industry4_0 #factory #robotics #cobotics #collaborativerobots #industrialautomation #artificialintelligence #RobotArms #industrialrobots #smartfactory #robotweek #robotics #cobotics #collaborativerobots #industrialautomation #artificialintelligence #RobotArms #industrialrobots #smartfactory

Autonics Tutorial | How to troubleshoot safety light curtain

※ Error code display "□" means that nothing is displayed on FND. For more details: https://www.ims.com.my/ iMS Motion Solution (Johor) Sdn Bhd Tel: +607-8635240 Email: info@ims.com.my #ims #imsmotionsolution #autonics #KRN1000 #KRN #Troubleshooting #Power #Controller #tutorial #alarm #DPU #paperless #autonicsMYA #2phase #EtherCAT #closedloopsystem #multiaxis #highresolution #feedbackcontrol #positioncontrol #alarmoutput #builtinbrake #Application #DCfan #medical #Autonics #Tutorial #KPN #Safety #Lightcurtain #troubleshooting #atlightcurtain #sfl #sfla

Dobot collaborative robots are famous all over the world, including Japan.

Recently our partner TechShare participated in Japan robot week from October 19th to 21st, exhibiting our robust robot arms: CR series, MG400, and M1 Pro. Drive performance with us and create #automation fast in a diverse #industrial environment. For more details: https://www.newpages.com.my/v2/en/company/727140/products/389818/DOBOT.html iMS Motion Solution (Johor) Sdn Bhd Tel: +607-8635240 Email: info@ims.com.my #ims #imsmotionsolution #dobot #mg400 #xtstechnologies #xtstech #robotics #technology #automations #industry4_0 #factory #robotics #cobotics #collaborativerobots #industrialautomation #artificialintelligence #RobotArms #industrialrobots #smartfactory #robotweek

Autonics Tutorial | How to set up 24VDC LPS(Loop Power Supply)

Dobot CR robot integrated with soft gripper

Autonics | AiC-EC Series

The AiC-EC series Ai-SERVO closed-loop stepper motors with EtherCAT support offers high compatibility between primary and secondary devices with EtherCAT open protocol.The motor system can control motion of multiple axes simultaneously with 100 Mbps communication speed For more details:https://www.ims.com.my/i MS Motion Solution (Johor) Sdn Bhd Tel: +607-8635240 Email: info@ims.com.my #ims #imsmotionsolution #autonics #KRN1000 #KRN #Troubleshooting #Power #Controller #tutorial #alarm #DPU#paperless#autonicsMYA #2phase #EtherCAT #closedloopsystem #multiaxis #highresolution #feedbackcontrol #positioncontrol #alarmoutput #builtinbrake

Autonics Tutorial | How to set the alarm output for Autonics KRN1000 paperless recorder

For more details: https://www.ims.com.my/ iMS Motion Solution (Johor) Sdn Bhd Tel: +607-8635240 Email: info@ims.com.my #ims #imsmotionsolution #autonics #KRN1000 #KRN #Troubleshooting #Power #Controller #tutorial #alarm #DPU #paperless

Dobot | CR collaborative robotics welding application

For more details: https://www.ims.com.my/index.php?ws=ourproducts&cid=411408&cat=Robot&subcat=CR-Series#openproducts iMS Motion Solution (Johor) Sdn Bhd Tel: +607-8635240 Email: info@ims.com.my #ims #imsmotionsolution #dobot #mg400 #xtstechnologies #xtstech #robotics #technology #automations #industry4_0 #factory #automation #robots #cobotics #collaborativerobots #industrialautomation #artificialintelligence #RobotArms #industrialrobots #factoryautomation #ai #vision

Festo Automation Suite | Multiprotocol

Find out how to set the desired Ethernet protocol of your CMMT-AS servo drive controller with multiprotocol function directly into the Festo Automation Suite.

Autonics Tutorial | How to troubleshoot TEMP alarm(DPU)

UNIPULSE | Press machine demo with portable force indicator F490A

Portable force indicator F490A - Compact, lightweight thus handy! - Record measured data with one-touch operation - Up to 6 calibration value can be stored - Variety of information displays (Measured value, graph, recorded data) Each button type load cell is equipped with a "load button" that is used to measure load accurately. Install a load cell with load being applied perpendicularly to the load button and measure the load value. For more details: https://www.newpages.com.my/v2/en/company/727140/product/214063/3654136/F490A-Portable-digital-inicator.html iMS Motion Solution (Johor) Sdn Bhd Tel: +607-8635240 Email: info@ims.com.my #ims #imsmotionsolution #unipulse #f490a #portableindicator

Festo Automation Suite

Find out how to commission your servo drives and mechanics, controllers and valve terminals as well as remote IO extremely easily and super fast in just 5 steps with the Festo Automation Suite commissioning software. Click here for the download and all details of the Festo Automation Suite: https://www.festo.com/automationsuite For more details: https://www.ims.com.my/ iMS Motion Solution (Johor) Sdn Bhd Tel: +607-8635240 Email: info@ims.com.my #ims #imsmotionsolution #festo #festoautomationsuite #suite

SANMOTION G | Next-Level Servo System That Combines "Strength" and "Flexibility"

- Powerful Performance - 1. Evolved Servo Performance ・Speed frequency response : 3.5 kHz ・Extended output range at high speeds : 1.15 times extended ・Encoder resolution : 17, 20, 23, 27 bit (battery-less) 2. Improved Reliability and Maintainability This servo system has various safety functions to ensure the safety of operators, such as monitoring of power supply status and communication quality, estimation of the remaining life of the holding brake, and prevention of electronic component failures. Also, the battery-less encoder eliminates the need for battery replacement, improving the reliability and maintainability of equipment. 3. Usable in Various Environments ・Altitude : 2000 m or less ・Vibration resistance: Amplifier : 6.0 m/s2, Motor: 50.0 m/s2 ・Operation temperature range: Amplifier : 0 to 60 ℃, Motor: 0 to 40 ℃ - Eco- and User-Friendly - 4. Compact, Lightweight, and Energy-saving ・Motor length : Max. 22 % shorter ・Amplifier mass : Max. 5 % lighter ・Motor mass : Max. 28 % lighter ・Amplifier power loss : 22% reduction ・Motor power loss : 8.4% reduction ・Holding brake power consumption : 44% reduction 5. Easy and User-friendly ・Integrated power line and brake line ・Abundant optional cables ・Abundant connector options ・Shorten startup time : "Advanced tuning" - Measures mechanical resonance, friction, and load inertia and automatically adjusts to optimal parameters ・Built-in safety functions : ISO13849-1(Cat3,PL=e) IEC61508(SIL3)

Autonics | The SFL series safety light

Autonics | The SFL series safety light curtains are installed in potentially dangerous or hazardous areas to safeguard personnel from injury. . #autonics Safety Product Series Safety products are installed in potentially dangerous or hazardous areas to safeguard personnel from injury and protect equipment from damage Various detection models (finger/hand/hand-body detection) and safety functions are available for diverse applications. For more details: https://www.ims.com.my/ iMS Motion Solution (Johor) Sdn Bhd Tel: +607-8635240 Email: info@ims.com.my #ims #imsmotionsolution #safetyproducts #safetylightcurtain #muting #blanking #safety #automation #factory #safetyfirstmalaysia #autonicsMY #autonicsMYA #safetylightcurtains #safetycontrollers #safetyswitches

Autonics Tutorial : How to use the Safety Light curtains muting function

00:00 Intro 00:13 Overview 01:15 Connection 01:25 When using the muting function, the emitter/orange wire acts as MUTE 1, and the emitter/pink wire acts as MUTE 2. In this case, RESET HOLD and AUX2 (auxiliary output 2) functions cannot be used. 01:42 Muting For more details: https://www.ims.com.my/ iMS Motion Solution (Johor) Sdn Bhd Tel: +607-8635240 Email: info@ims.com.my #ims #imsmotionsolution #Phase #Contol #Autonics #tutorial #TK4S #Recovered #safety #lightcurtain #muting #atlightcurtain #sfl #sfla

Dobot | ESTABLISHING GROUNDBREAKING COOPERATION!

Ultrand Industrial Solutions created an automated #depalletizing system using #DOBOT #cobot CR10. Here is a quick brief: 🔹 lifts up to 16 kg 🔹 supports multiple containers and bottles 🔹 depalletizes 25 products per minute 🔹 inspects via an AI vision safety control 🔹 requires minimum space to depalletize For more details: https://www.ims.com.my/index.php?ws=ourproducts... iMS Motion Solution (Johor) Sdn Bhd Tel: +607-8635240 Email: info@ims.com.my #ims ##imsmotionsolution #automation #robots #cobotics #collaborativerobots #industrialautomation #artificialintelligence #RobotArms #industrialrobots #factoryautomation #ai #vision

Dobot | Have you ever wondered if #collaborativerobots (cobots) are really safe

let's take a second to think about it. If you have a sharp gripper on the end of your #cobot , could that be dangerous? What if it bumped the operator on their face? Could it cause harm? As #robotics becomes more commonplace in industrial environments, it's important to understand the safety concerns that come with cobots. Depending on the application cobot safety requirements are not very different to the conventional industrial robots. Especially when cobots have dangerous end effectors and have to run at fast speeds. That is why DOBOT Industry Safe Skin Technology is so interesting. It creates a virtual safety bubble around the robot and stops the robot before any collision. This type of #technology is a step closer to real safe man-machine collaboration. For more details: https://www.ims.com.my/index.php?ws=ourproducts&cid=411408&cat=Robot&subcat=CR-Series#openproducts iMS Motion Solution (Johor) Sdn Bhd Tel: +607-8635240 Email: info@ims.com.my #ims #imsmotionsolution #dobot #dobotcr #robotics #cobotics #collaborativerobots #industrialautomation #industry40 #artificialintelligence #automationsolutions #RobotArms #industrialrobots #factoryautomation

Autonics Tutorial : How to set Phase and Zero crossing control(DPU)

For more details: https://www.ims.com.my/ iMS Motion Solution (Johor) Sdn Bhd Tel: +607-8635240 Email: info@ims.com.my #ims #imsmotionsolution #Phase #Contol #Autonics #tutorial

Pudu Robotics | BellaBot serves at Ristorante Pizzeria FuoriCittà in Italy

#BellaBot is designed to assist in providing better dining services. Ristorante Pizzeria FuoriCittà is a family-run restaurant, it was born about 20 years ago, and they chose to use BellaBot after the restaurant renovation. With the cooperation of BellaBot and the waiters, they gained better customer reviews. The owner and manager of the restaurant, Valentina, said they were very satisfied with BellaBot and were considering introducing one more robot. For more details: https://www.ims.com.my/ iMS Motion Solution (Johor) Sdn Bhd Tel: +607-8635240 Email: info@ims.com.my #IMS #IMSMOTIONSOLUTION #PUDUBOT #pudurobotics #ims #robotics #PuduRobotics #servicerobot ##deliveryrobot #robot #contactlessdelivery #puduroboticsindonesia #italy #pizzeria

Tutorial: G-Series I/O - Part 3, Setting Parameters with IO-Guide software

This tutorial demonstrates the steps to make parameter changes to the Network Adapter and I/O slices. For more details: https://www.ims.com.my/ iMS Motion Solution (Johor) Sdn Bhd Tel: +607-8635240 Email: info@ims.com.my #crevis #ims #imsmotionsolution #gseries #io #tutorial #ipaddress

According to Statista, in 2022, the number of #agricultural robots is going to reach 9.3 billion in comparison to 6 billion in 2020.

DOBOT is increasing the global volume of the agricultural market. Thanks to the 3D vision system, our CR series robot arm is sorting agricultural products. Its easy-to-program design and precise vision create safe human-robot collaboration. For more details: https://www.ims.com.my/ iMS Motion Solution (Johor) Sdn Bhd Tel: +607-8635240 Email: info@ims.com.my #IMS #IMSMOTIONSOLUTION #cobot #medicaldevice #manufacturing #robotics #cobotics #collaborativerobots #industrialautomation #industry40 #artificialintelligence #automationsolutions #RobotArms #industrialrobots #factoryautomation #3Dvision

Crevis Tutorial: G-Series I/O - Part 2, Connecting to a Network Adapter via IO-Guide software

This tutorial demonstrates the steps to make a connection between the G-Series I/O Network Adapter and the IO-Guide software. For more details: https://www.ims.com.my/ iMS Motion Solution (Johor) Sdn Bhd Tel: +607-8635240 Email: info@ims.com.my #crevis #ims #imsmotionsolution #gseries #io #tutorial #ipaddress

Crevis Tutorial: G-Series I/O - Part 1, Setting an IP address via BootP

This is a quick tutorial on setting the IP address, Subnet and Gateway in a G-Series Remote I/O Network Adapter. The BootP Server utility in the IO-Guide software is utilized

Autonics Tutorial | How to troubleshoot stepper motor system

00:00 Intro 00:10 Overview 00:39 Self diagnosis function 01:21 Check the controller 03:10 Other issues

Autonics | Semiconductor Production Process

1. Oxidizing / Thin film process 2. Photo process 3. Etching process 4. Test process 5. Packaging process 6. Assembly process For more details: https://www.ims.com.my/ iMS Motion Solution (Johor) Sdn Bhd Tel: +607-8635240 Email: info@ims.com.my #ims #imsmotionsolution #Autonics #Semiconductor #Production #packaging

SANYO DENKI in Convenience Stores | Application Examples

In convenience stores, SANYO DENKI products are used in equipment that heats and cools food products and provides various convenient services. or more details: https://www.ims.com.my/ iMS Motion Solution (Johor) Sdn Bhd Tel: +607-8635240 Email: info@ims.com.my #ims #imsmotionsolution #SanyoDenki #application #conveniencestore

DOBOT’s partner demonstrates the #DOBOT #SafeSkin innovative technology.

DOBOT’s partner demonstrates the #DOBOT #SafeSkin innovative technology. It’s a silicone buffered collision detection solution that protects humans and increases collaboration efficiency. Helpful insights of DOBOT SafeSkin: 🔹 10 cm detection distance 🔹 fast response within 10 ms 🔹 human-machine collaboration speed increased from 0.25m/s to 1m/s For more details: https://www.ims.com.my/index.php?ws=ourproducts&cid=411408&cat=Robot&subcat=CR-Series#openproducts iMS Motion Solution (Johor) Sdn Bhd Tel: +607-8635240 Email: info@ims.com.my #ims #imsmotionsolution #robotics #cobotics #collaborativerobots #industrialautomation #industry40 #artificialintelligence #automationsolutions #RobotArms #industrialrobots #factoryautomation #BIEMH

Autonics HMI GP | LP-A Series

"A New Standard for HMIs" Flexible, Elegant, User-Friendly, Space-Saving HMIs provide users with an interface to directly interact with machines in order to control and monitor various processes For more details: https://www.ims.com.my/ iMS Motion Solution (Johor) Sdn Bhd Tel: +607-8635240 Email: info@ims.com.my #imsmotionsolution #IMS #autonics #autonicsMY #HMI #flexible #elegant

dobot_arm Welcoming a #DOBOT’s innovative #welding package!

Why is it different? 🔹 it automates laser and arc welding 🔹 is applicable to diverse materials, such as carbon steel, stainless steel, aluminum and copper 🔹 is designed to weld multiple shapes, including linear, triangular, spiral, trapezoidal, and sinusoidal to meet diverse welding needs For more details: https://www.ims.com.my/ iMS Motion Solution (Johor) Sdn Bhd Tel: +607-8635240 Email: info@ims.com.my

[UNIPULSE] Let's try UNI-Format! | Continuous Data Transmission

When you select either RS-232C or RS-485 to a communication interface, you will find "UNI-Format" as one of the options. By transmitting commands from a host, not only communicating weight values and/or parameters, but also continuous transmission can be operated. This communication format can be used easily on a terminal software on PC. Continuous mode transmits specified information continuously without commands from the host. Indicators with RS-485 communication is equipped as standard: F701-P https://www.newpages.com.my/v2/en/company/727140/product/414093/3724145/F701-P-Global-standard-model-basic-performance-design-weighing-indicator.html

Autonics | AiSA closed loop stepper motor AC power driver

Ausweg developed a demo with an DOBOT MG400 implementing #pickandplace application.

Pick & Place #robot arranges the relays into appropriate location. For more details: https://www.ims.com.my/index.php?ws=showproducts&products_id=3798958&cat=Robot&subcat=DOBOT#openproducts iMS Motion Solution (Johor) Sdn Bhd Tel: +607-8635240 Email: info@ims.com.my #cobot #roboticsolutions #industrialautomation #industry4point0 #application #india #demo #robotics #packaging #imsmotionsolution #IMS

[UNIPULSE] Let's try UNI-Format! | Command mode demo

When you select either RS-232C or RS-485 to a communication interface, you will find "UNI-Format" as one of the options. By transmitting commands from a host, not only communicating weight values and/or parameters, but also continuous transmission can be operated. This communication format can be used easily on a terminal software on PC. By transmitting a command to an ID specified by a host (on PC side), the corresponding indicator sends back a response.

Although pick and place is one of the simplest repetitive tasks in #manufacturing, hence businesses need to #automate this process

Although pick and place is one of the simplest repetitive tasks in #manufacturing, hence businesses need to #automate this process Our DOBOT MG400 #cobot performs picking and placing even in small parts. It accurately grabs and puts it in a specific location. #Robotic accessories also affect the performance of the DOBOT robotic arm. The suitable #ecosystem, e.g., #gripper, complements the cobot and makes the entire picture perfect. For more details: https://www.ims.com.my/index.php?ws=showproducts&products_id=3798958&cat=Robot&subcat=DOBOT#openproducts iMS Motion Solution (Johor) Sdn Bhd Tel: +607-8635240 Email: info@ims.com.my #ims #imsmotionsolution #DOBOT #grasping #robots #robotics #collaborativerobots #cobots #automation #robotarm #industria40 #softrobotics #industrialrobots #smartfactory #automation #gripping #manufacturing #pickandplace

Do you know how to configure the ROS2 operation node for the #DOBOT MG400 collaborative robot?

Do you know how to configure the ROS2 operation node for the #DOBOT MG400 collaborative robot? A Japanese student has created an ROS2 operation node to control our #robotic arm. 🤖 No need to guide a robotic arm with your laptop or tablet. Using this configuration, controlling the DOBOT MG400 #cobot has become much easier with the PlayStation controller. For more details: https://www.ims.com.my/index.php?ws=showproducts&products_id=3798958&cat=Robot&subcat=DOBOT#openproducts iMS Motion Solution (Johor) Sdn Bhd Tel: +607-8635240 Email: info@ims.com.my #ims #imsmotionsolution #robotics #cobots #collaborativerobots #automation #industrialautomation #industry40 #manufacturing #artificialintelligence #automationsolutions #RobotArms #industrialrobots #factoryautomation #dobot

Dobot CR5 robot chef at china noodle restaurant!!

Dobot CR5 robot chef at china noodle restaurant!! The automated solution in pick and place in consumer #electronics! #DOBOT CR5 #robotic arm operates smartphone screen pick and place. Robotic pick and place of a smartphone screen is: 🔹efficient 🔹time-saving 🔹accurate

Festo | Perfectly sized automation components with engineering tools

#Thebluepath to higher efficiency with Felix Borgiel, Product Manager Software and Tools. His work is all about helping you to find the right solution for your application. Your way to #zeroemissions!

You definitely haven’t considered the process of picking and placing performed by a human.

You definitely haven’t considered the process of picking and placing performed by a human. However, have you ever thought about how to #pickandplace smartphones using a #robotic arm and what perks it might bring to the business? 📌Today, #production line automation has become safer and faster with the use of DOBOT MG400 and its sliding rail. #MG400 is a lightweight collaborative robot that can pick and place smartphones in consumer #electronics, ensuring high accuracy and speed of the operation in the long run. Sliding rail enables a larger workspace, allowing the #cobot to move in the working environment. Discover more ways how to automate #manufacturing with DOBOT MG400 👉https://www.ims.com.my/index.php?ws=showproducts&products_id=3798958&cat=Robot&subcat=DOBOT#openproducts #robots #roboticarm #cobots #collaborativerobots #automation #industrialautomation #industry40 #artificialintelligence #automationsolutions #industrialrobots #factoryautomation #processautomation #desktoprobot #imsmotionsolution #IMS

DOBOT CR | Healthcare Industry

Do you have a wow effect from the #DOBOT #cobots? If no, then now you will definitely have. DOBOT and Roboware are presenting a robust solution for the #healthcare industry! DOBOT cobots are not only applicable for #industrial use but also the healthcare industry. Picking and placing six pipettes and labeling are just some of the applications our CR series cobots are capable of.

Festo tutorial | replacing the wearing parts at the linear drive DGC

00:00 parts list: products and tools 00:13 demounting wearing parts 02:15 mounting wearing parts This video shows the instructions at the following products as an example: - 532447, linear drive, DGC-25-200-KF-PPV-A, series ND - 8122556, set of wearing parts, DGC-25-G/GF/KF:FR08-2009, series Dez 21 For more details:

Autonics Tutorial : How to troubleshoot incremental encoder

Unboxing the FESTO new cylinder switches SDBT-MSX and SDBT/C-MSB

SDBT-MSX cylinder switch with auto teach-in function offers extremely simple, quick and safe commissioning without precision adjustment and readjustment. SDBT/C-MSB cylinder switches with solid-state technology offer a longer service life compared to conventional mechanical reed switch and ideal for basic application.

SanyoDenki Leasson | Compact Cylinder Linear Servo Motor - Soft Touch Function

Autonics | Better, Wider, Compact LiDAR LSC Series

[UNIPULSE] Secret for installation method of UTM: Case . Without vibration [Torque meter]

Compact & lightweight, accuracy, responsivity, durability, stability, non-contact… Achieved the world's best in all aspects. UTMIII is a UNIPULSE's rotary torque meter supported by many customers. ------ One of the advantages to UTM series is that this torque sensor can directly measure torque which applies at its main axis. Such advantages can be obtained! - There are less points to adjust alignment. - By rotating in slow speed, fluctuations such as misalignments or angle errors can be checked from torque values. - When rotating, the housing vibrates due to fluctuations such as misalignments or angle errors. From these vibrations, misalignments can be checked. With misalignments and angle errors… - A paperclip fell off from the housing of UTM due to vibrations. - Phenomenon such as large detection widths on the vibration monitor V100 were confirmed.

SANYO DENKI Compact Cylinder Linear Servo Motor

Check out SANYO DENKI the features of our compact cylinder linear servo motor. Some of the highlights include: - Built in linear guide and encoder - Industry- leading acceleration and deceleration - Multiple unit arrangement

Autonics Tutorial : How to set up Alarm and DI function(KRN100)

SwiftBot Commercial Launch | Pudu Robotics

Powered by industry-leading collision sensing technology and Pudu-developed advanced algorithm, SwiftBot can conduct and complete its tasks with ease, while at the same time surprises you with its multifunctionality and high-reliability. SwiftBot, redefining human-robot relationship！

Motion made easy – Festo Simplified Motion Series

The integrated drives of the Festo Simplified Motion Series are the perfect solution for users who are looking for an electric alternative for simple movement and positioning tasks, but who don’t want the commissioning process for traditional electric drive systems that can often be quite complex.

Festo The quickest way ever to the right handling system

There really is no quicker or easier way: the Handling Guide Online (HGO) considerably increases your engineering efficiency and gives you the certainty that your system is correctly sized. Watch as Bill Fontaine, Electric Automation Business Development, and Steve Hunt from iAutomation discuss the benefits HGO provided for iAutomation’s customer

Festo New Website Launch

Festo is world-renowned for its innovative, cost-effective and reliable automation solutions, and we've rebuilt our website to live up to those attributes. Visit Festo today, learn about our new website and discover the tools and support you need more easily, quickly and efficiently. Discover the new Festo.com now: bit.ly/3vKl6Zn

Autonics Tutorial : HMI Numeric Display

Efficient Automation Control with Autonics HMI HMIs provide users with an interface to directly interact with machines in order to control and monitor various processes. #FLEXIBLE #ELEGANT #USERFRIENDLY

BellaBot serves at Johnny's Restaurant in Malaysia, Kuala Lumpur | Pudu Robotics

The operation manager of Johnny's Restaurant said they are really excited that BellaBot brings more business for them. Because BellaBot brings joy to every customer who chooses to have a meal in Johnny's Restaurant.

Festo service unit component series MS-Basic

The MS-Basic in a polymer housing offers you attractively priced basic components focused on the most important technical functions of compressed air preparation such as pressure regulation, filter regulation and manual or electric switch-on. And it is fully compatible with the MS series. This allows you to create the best possible mix of low-cost basic functions and any high-end functions you need.

UNIPULSE/ROBOTEC | Intelligent Assist Balancer Moon Lifter

Moon Lifter (Intelligent Assist Balancer) is a lifting device that assists you a heavy object weighing 10 to 1500 kg and moves it with a light force. Gentle transportation that does not damage workpieces has been achieved by holding them with hands directly. Moon Lifter has been used for the following work operations such as: - for setting workpieces on processing machines & assembling processes at manufacturing - for transporting bags filled with raw materials & charging in tanks - for packing finished products & stacking folding containers

Autonics Tutorial : HMI Series Operation

Efficient Automation Control with Autonics HMI HMIs provide users with an interface to directly interact with machines in order to control and monitor various processes. #FLEXIBLE #ELEGANT #USERFRIENDLY

Efficient Automation Control with Autonics HMI

HMIs provide users with an interface to directly interact with machines in order to control and monitor various processes. #FLEXIBLE #ELEGANT #USERFRIENDLY

Unipluse Let's Calibrate! Part 2 | How to do Equivalent Calibration

Equivalent Calibration is a method to perform calibration based on voltage information of the rated output of a load cells. By this method, calibration can be performed without applying load by balance weight and such.

Unipluse Let's Calibrate! Part 1 | How to do Span Calibration

Span Calibration is a method to perform calibration by putting balance weight and such on a load cell. This method is frequently used for weighing measurement. While balance weights and spaces for putting those weights are required for Span Calibration, it can calibrate more accurately than Equivalent Calibration.

Festo Simplified Motion Series (SMS) Demo

Simple electric automation solution The move towards electric automation technology is not without its challenges. As well as extensive knowledge of electrics and software, you also need a relatively large budget – so it is no wonder that the benefits of electric automation have so far remained reserved for complex motion requirements. This is now changing: our Simplified Motion Series gives you an automation solution that bridges the gap between easy-to-install pneumatics and smart electric automation. Make your production more efficient: simply with plug and work. Pneumatics continues to be the tool of choice for simple movement and positioning tasks. However, in an increasingly digitalised world, electric automation and a continuous flow of information from the workpiece to the controller and the cloud are becoming indispensable. This enables you to reduce commissioning time, guarantee cost-efficient production and handle shorter product life cycles. The savings in ongoing operations therefore offset the higher investment costs of electric automation solutions. Commissioning is also simple and quick now. How? With our Simplified Motion Series.

Pudu Robot 2.0 - PUDU D1 | Pudu Robotics

Introducing PUDU D1! The first Delivery-Quadruped Robot with all-terrain adaptability is a brand-new product for last-mile delivery.

Machine Vision Systems from Festo

From inspection to identification, barcode reading to robotic guidance, measurement to color analysis, Festo provides machine vision solutions to suit your needs. With higher resolutions, more powerful software tools, easier integration and more flexibility, the latest generation of SBS vision sensors provide the right features and tools to meet your demanding machine vision requirements.

Festo Pneumatic extension modules VTOP

The VTOP is ideal for control applications with positioner and additional instrumentation. The pneumatic extension modules facilitate a complete setup, without tedious searches for components and time-consuming installation, and thus greatly simplify maintenance. The new installation concept VTOP with patented, integrated air routing allows you to combine the individual modules you need, and easily retrofit other modules at any time.

The MG400 automation training station

The MG400 automation training station is designed for vocational studies and higher education institutions to help students understand the function and performance of a standard automation system and improve the training result.

Autonics Tutorial : How to set analog input(TK Series)

TK Series High Performance PID Temperature Controllers The TK series high performance PID temperature controllers feature high-speed sampling cycle rate of 50 ms with ±0.3% display-accuracy. The controllers offer high precision temperature control with features such as simultaneous heating and cooling control and automatic/manual control options. The all-purpose temperature controllers are available in various sizes and input/output options, for stable and precise temperature control of any required application.

Pudu Robot 2.0 - PUDU A1 | Pudu Robotics

Introducing PUDU A1! See how #PUDUA1 can skillfully identify the different types of food and deliver it to your table. Check out the video, stay tuned for more

Autonics Tutorial : KRN50 Series Operation

KRN50 Series 50 mm Compact Hybrid Recorders The KRN50 series 50 mm hybrid recorders are compact-sized recorders including main functions of larger sized recorders. The data logger function allows paperless recording and data backup. Main features 50mm thermal transfer method of paper recorder Data logger function for recording without paper 2-channel simultaneous recording - graphic mode, digital mode RS485 communication and dedicated communication port to set or monitor parameters in real-time by PC/PLC Multi-input with high accuracy 0.2% level (TC, RTD, Voltage, Current(shunt)) Various option I/O function Small size (W96×H96×L100mm), light weight

Dobot CR Collaborative Robot Series

CR collaborative robot series is DOBOT's 2nd generation of 6-axis robotic arm based on collaborative technology, ideal for various industrial needs such as #palletizing, #handling, #polishing, etc. "We spend years specialized in enhancing CR collaborative robot series. It can be used in a wide range of industrial scenarios and has tremendous potential in developing intelligent automation. Ensuring the precondition of quality and safety, the CR series can efficiently complete the work and achieve economizing on workforce and increase production efficiency. As of now, the CR series has been applied in manufacturing by many well-known enterprises. With each machine replacing 2~3 workers, production efficiency has been increased by more than 40%." said Feifei Zhuang, Vice Product Director of R&D Department of DOBOT.

Festo Proximity sensor SDBT-MSX

Magneto-resistive proximity sensor for T-slot, for installation from above. Compliant with EU explosion protection directive (ATEX) and fitted with NAMUR output. - Measuring principle: magneto-resistive - Oil-resistant, welding field-resistant, resistant to welding spatter - Can be inserted into the slot from above, secured with screw - LED switching status indication - Cable length 0.3 ... 5 m - SDBT-EX6: To EU Explosion Protection Directive (ATEX

Festo Five Steps to Eliminate Error Free Process Adjustments

The ongoing need to make process adjustments in modern automation systems opens itself up to unwanted device tampering. Discover the five steps to making efficient, error-free process adjustments.

Autonics Tutorial : Weekly/Yearly Timer Basic Tutorial

LE7M-2 Series Digital Week/Year Timers The LE7M series digital week/year timers allow time configuration and control in week or year units. Simple configuration and status monitoring is possible with 2 independent built-in relay control outputs. DIN rail mount type is available for convenient installation. (size: DIN W72XH7）

Autonics Tutorial : Weekly Timer ON/OFF Operation

LE7M-2 Series Digital Week/Year Timers The LE7M series digital week/year timers allow time configuration and control in week or year units. Simple configuration and status monitoring is possible with 2 independent built-in relay control outputs. DIN rail mount type is available for convenient installation. (size: DIN W72XH72）

Pudu Robot 2.0 - SwiftBot | Pudu Robotics

SwiftBot is a versatile delivery robot that reduces human-robot road congestion by 50% and increases machine running speed by 30% in restaurants.

Pudu Robotics announced launch of new products 2022

Pudu Robotics announced launch of new products to provide comprehensive solutions for the hospitality and cleaning industry. Check out the video to know more about our new product.

Pudu Robotics Unveils Four New Robots at Its Spring New Product Launch

"We are not only releasing a few new standalone products, but also hope to bring new solutions to the industry,” said Felix Zhang, founder and CEO of Pudu Robotics. “The comprehensive upgrade of our products and technology in 2022 also marks the beginning of the Pudu Robot 2.0 era. In addition to the existing delivery robots, we will carry on expanding the product line of cleaning robots. We will also keep on refining new products in line with industry best practices across different service scenarios, to promote the in-depth integration and innovation of AI in commercial service robots." SwiftBot is a versatile delivery robot that reduces human-robot road congestion by 50% and increases machine running speed by 30% in restaurants. PUDU A1, the first composite robot in the restaurant business, and PUDU D1, the first quadruped delivery robot, open up new possibilities of robot applications across various restaurants and commercial environments. PUDU SH1 is another foray for Pudu Robotics into the cleaning field after the official release of its first cleaning robot CC1 in mid-November 2021. PUDU SH1 is a professional small-size digital commercial floor scrubber, dedicated to attaining efficient cleaning, convenient operation, and easy management, boosting the cleaning industry's digital upgrading. This event of Spring New Product Launch marks a new milestone for Pudu Robotics. As the company enters the Pudu Robot 2.0 era and expands its product application areas gradually from catering to buildings, healthcare, cleaning, and other fields, Pudu Robotics has set a larger goal of providing overall delivery, cleaning, marketing, and other comprehensive solutions to more sectors, continuing its mission of using robots to improve the efficiency of human production and living.

How to troubleshoot Autonics photoelectric sensors(Troubleshooting)

Festo standard NAMUR valve VSNC with new variants

The standard NAMUR valve VSNC is certified worldwide in accordance with the usual explosion-protection standards and can be used in many industry segments and applications - now with new variants. Its distinguishing features are a modern design, durable quality and fully tested

Unipluse 3 best indicators for force measurement! Manage assembly process by waveform comparison

In case of Y-axis as Load & X-axis as Time: - Waveform varies as speed differs. That is, basis of OK waveform is liable to change. In case of Y-axis as Load & X-axis as Distance: - Waveform is stabilized every time even if speed differs. Thus, Waveform comparison is effective.

The 2nd Generation SafeSkin - Make Man-machine Collaboration Even Safer

The new generation SafeSkin has come out! We use a new soft silicone material to make the impact of our SafeSkin lighter. Besides, we have also improved the response sensitivity of the sensor. On this basis, the collaborative operation is safer and more worry-free.

UNIPULSE OK/NOK judgement for cap tightening by UNISERVO [Torque Actuator]

What is UNISERVO? UNISERVO is a rotary actuator with a built-in torque meter. Space-saving can be achieved for equipment or test machine that are used with motors and torque meters in combination. What makes UNISERVO so splendid? Space-saving As UNISERVO can measure torque while driving motor, a length in axial direction can be significantly reduced in the case of torque measurement. Built-in torque meter is UTM series made by UNIPULSE UTM is a torque meter that achieves the world's highest level of accuracy and outstanding stability of zero point. Therefore, UNISERVO can perform high-accuracy & high-responsive torque measurement.

[UNIPULSE] F490A: Periodic & Quick Load Check with Handheld Indicator

F490A is a compact, lightweight handheld digital indicator for strain gauge type sensors that allows measurement of load, pressure and torque. The measurement data is recorded in CSV format in its internal memory, and the file can be referred to and copied through USB interface. F490A is equipped with fulfilling functions such as a variety of information displays, four types of hold functions including Peak and Valley, multi-calibration function that enables storing six channels of calibration values and allows them to be selected by a field sensor, and a HO / LO limit comparison function. The operation of AA alkaline batteries provides continuous use for approx. 30 hours*. * Connectable to 350Ω series sensor while backlight is off.

FESTO ADN: Replacing wearing parts

Today tutorial is about replacing the wearing parts at the FESTO compact cylinder ADN. ( ADN: Replacing wearing parts ) -parts list: products and tools -Demounting wearing parts -Mounting wearing parts This video shows the instructions at the following products as an example: - 536296, compact cylinder, ADN-40-50-A-P-A, series NN - 673624, set of wearing parts, ADN-40-P-A, series 08-2021

DOBOT M1 & DOBOT Magician - Production Simulation Pick & Place

DOBOT M1 & DOBOT Magician Production Simulation Pick & Place DOBOT M1 is a cost-effective intelligent robotic arm for light industry. With high precision, wide working range, complete functions and secondary development, it provides users more ways to use. M1 can realize multiple functions of assembly line work such as soldering, visual recognition and PCB plug-in, helping to construct the intelligent industrial system. Let us know how we can help you in automation with our latest collaborative robots. Contact us https://www.ims.com.my/ https://www.ims.com.my/index.php?ws=ourproducts&cid=389818&cat=Robot&subcat=DOBOT#openproducts iMS Motion Solution (Johor) Sdn Bhd Tel: +607-8635240 Email: info@ims.com.my

Festo smart positioner CMSH with HART communication

The CMSH provides you with all the benefits of a highly dynamic, low-wear positioning system with high air output and a long service life. You now only need one device for the fast and precise control of actuators, whether large or small, linear or rotary, single- acting or double-acting. Together with the low internal air consumption, this reduces costs. Featuring 2-wire technology, HART communication, condition monitoring functions and a modular system with many variants, the CMSH offers excellent flexibility for a great number of applications.

DOBOT Magician Lite

DOBOT Magician Lite, a multi-functional lightweight intelligent robotic arm, is one of the core products in DOBOT’s K12 customized artificial intelligence education ecosystem. Magician Lite enjoys numerous software and hardware interaction methods and expansion interfaces in order to maximize students’ freedom to create. Through building and playing, students can learn how artificial intelligence and mechanics work. They will be also introduced to a world of rudimentary knowledge of robotics and how they can be used in real world. Let us know how we can help you in au

Let's build a simple weighing scale with FC400 [UNIPULSE]

We used FC400-DAC, a weighing indicator with abundant weighting functions. FC400-DAC is a compact weighing Indicator with D/A converter. It is suitable for many weighing applications such as hopper scale, packing scale, weight level meter, etc…. Either voltage or current output, corresponding to the indicated value, is available.

Deliver Wish and Love Everyday | Pudu Robotics

BellaBot The latest delivery robot designed by Pudu, BellaBot inherits the outstanding characteristics of the previous generation, while being endowed with superior human-Robot interaction capabilities. Featuring an innovative bionic design language, cute modeling,multi-modal interaction and many other new functions, BellaBot provides users with an unprecedented food delivery robot experience. Industry-exclusive Dual SLAM Solution for Full Coverage in Any Scenario BellaBot supports both Laser SLAM and Visual SLAM positioning and navigation solutions in order to adapt to more scenarios. Both of which are accurate and easy to use. Both positioning solutions which BellaBot offers provides the same excellent user experience. While the positioning solutions differ, BellaBot's customer-centered service never changes.

[DOBOT M1 Video Tutorial] How to Wiring and Power On

Pudu Robotics

DSBC, DSBF-C: Replacing the set of wearing parts

Today Lesson : DSBC, DSBF-C: Replacing the set of wearing parts Replacing the wearing parts on Festo Southeast Asia Festo cylinder DSBC, DSBF-C – this tutorial explains how it's done. -Dismantle cylinder -Remove old wearing parts -Clean components -Install new wearing parts -Assemble cylinder DSBC The universal cylinder Standard profile with two sensor slots Numerous variants Diameter: 32, 40, 50, 63, 80, 100, 125 mm Stroke length: 1 ... 2800 mm Force: 483 ... 7363 N Double-acting Position sensing Fixed/adjustable/self-adjusting cushioning

M1 Pro is the 2nd Generation Collaborative SCARA Robot!

M1 Pro is the 2nd Generation Collaborative SCARA Robot! DOBOT's latest product-M1 Pro is the second generation of collaborative SCARA robots. On the basis of inheriting the advantages of the previous generation product M1, M1 Pro has a precise dynamic tracking function. It also integrates with the software platforms of other industrial products, supports more convenient programming methods, and greatly improves the ease of use.

Dobot M1 robotic arm first impressions

FESTO connect & discover | Electric Automation

Autonics Tutorial : How to set the input prescale

Autonics Tutorial : How to set the input prescale MP5S/MP5Y/MP5W Series High Performance Digital Pulse Meters The MP5S/MP5Y/MP5W series high performance digital pulse meters can display various values using pulse inputs including rotation speed, speed, frequency, and more with 16 different operation modes. The meters can be applied in various industrial applications for accurate measurement and clear readings. *Select features of the MP5S/MP5Y/MP5W series have been upgraded. Please refer to the specifications table for upgrade details.

Do you really know about AC Servo Motor with Brakes?

SANYO DENKI SANMOTION R1 vs R2 : Low Inertia Motor vs Medium Inertia Motor

How to Operate SANYO DENKI RS3 EtherCAT Digital Operator

Quick tutorial on how to use the digital operator on SANYO DENKI RS3 ETHERCAT drives. - Changing Modes - STO Torque Error Status - Normal Servo on State - Encoder Clear - Jog Operation - Alarm Clear - Alarm History - Actual Position Monitor - Velocity Monitor - Torque Monitor

Some preview and try out for Pudu Robotics ( Cyber Robotics Sales Agent Presentation 3.0 )

DOBOT MG400 with electromagnetic gripper

Electrocraft Stepper Linear Actuator APES23

ElectroCraft expanded the AxialPower™ Enhanced Series of Linear Actuators to include a new high-performance 42mm and 56mm (NEMA 17,23) frame size. This new linear actuator is highly configurable and available with a variety of imperial or metric leadscrew options. The Enhanced-Series offers 50% more force than competitive sized designs.

DOBOT MG400 4 Axis lightweight desktop robot

DOBOT MG400 is a lightweight desktop robot with a footprint smaller than one piece of A4 paper. Designed to be flexible to deploy, easy to use, and safe to collaborate, MG400 makes automation affordable and accessible for diversified and small-batch production scenarios. Featuring 750g payload, 440mm maximum reach, hand guidance and collision detection, MG400 is truly a perfect fit for lightweight desktop industrial applications that requires fast deployment and changeover.

Output Torque, Rotation Speed & Angle Simultaneously! TC80-D3V

Autonics Tutorial : If the counter does not count_CT Series

Autonics : Photoelectric Sensor Lens Cutting and Quality Inspection Demo

Autonics Tutorial : How to set analog output(PSQ Series)

Autonics Tutorial : How to set EASY mode(PSQ Series)

ELGC: Replacing the toothed belt ( Mounting the toothed belt )

Autonics : 16 mm Control Switches S/L Series

ELGC: Replacing the toothed belt ( Demounting the toothed belt )

ELGC : Replacing the belt reversal

Replacing the belt reversal of the toothed belt axis ELGC. This tutorial explains, how you dismantle the old belt reversal and subsequently mount a new belt reversal.

Autonics TMH Series

ELGC: Replacing the cover strip

iMS MOTION SOLUTION

iMS Motion Solution (Johor) Sdn Bhd is one of the leading company in motion & control technology industrial. Our main office is located in Ulu Tiram, Johor. We are providing motion solutions, motion devices & electrical control components to factory automation, manufacturing plant & industrial automation sector. With a focus on automation solutions that help our customers meet productivity objectives, iMS Motion Solution (Johor) Sdn Bhd brings together leading brands in industrial automation. Namely, Autonics, Shihlin Electric, Apex Dynamics, Sanyo Denki, Meister, GGM, EDrive, ElectroCraft, Mitsubishi, Panasonic, UIRobot & more. Partnering with these manufacturers, iMS manages to maintain its reputation in providing quality, reliable and innovative products and services. iMS Motion Solution (Johor) Sdn Bhd ( Company Registration No: 201401022685 / 1098771-W ) No.7, Jalan Sasa 4,Taman Gaya, 81800 Ulu Tiram, Johor Bahru, Johor. Malaysia. TEL: +607-8635240 FAX: +607-8637240 MOBILE: +6019-6774477 (whatsapp) EMAIL: info@ims.com.my| www.ims.com.my HOTLINE : 1700-818-330

Linear actuator ELGC

The reasonably priced actuator family ELGC allows you to realize incredibly compact dimensions and make the most of your installation space – for small parts handling, desktop applications and much more. The belt driven linear actuator offers precise, durable rail guidance. ✪Precise and resilient guide ✪Internal guide and toothed belt ✪Flexible motor mounting ✪The belt driven linear actuators, ball screw linear actuator ELGC and mini ✪slides EGSC form a scalable modular system for compact automation iMS Motion Solution (Johor) Sdn Bhd is one of the leading company in motion & control technology industrial. Our main office is located in Ulu Tiram, Johor. We are providing motion solutions, motion devices & electrical control components to factory automation, manufacturing plant & industrial automation sector. With a focus on automation solutions that help our customers meet productivity objectives, iMS Motion Solution (Johor) Sdn Bhd brings together leading brands in industrial automation. Namely, Autonics, Shihlin Electric, Apex Dynamics, Sanyo Denki, Meister, GGM, EDrive, ElectroCraft, Mitsubishi, Panasonic, UIRobot & more. Partnering with these manufacturers, iMS manages to maintain its reputation in providing quality, reliable and innovative products and services. iMS Motion Solution (Johor) Sdn Bhd ( Company Registration No: 201401022685 / 1098771-W ) No.7, Jalan Sasa 4,Taman Gaya, 81800 Ulu Tiram, Johor Bahru, Johor. Malaysia. TEL: +607-8635240 FAX: +607-8637240 MOBILE: +6019-6774477 (whatsapp) EMAIL: info@ims.com.my| www.ims.com.my HOTLINE : 1700-818-330

Shihlin EtherCAT Servo Drive SDP