.jpg)
7, Jalan Sasa 4,
Taman Gaya,
81800 Ulu Tiram,
Johor, Malaysia.
Load Cell & Torque Sensor
We manufacture sensors such as loadcells and torque meters using our high-accuracy strain gauges. Our weighing indicators are widely used for auto-weighing machines such as Dosing machines, Filling machines, Packer scale, Hopper scale, Weigh bridges, Belt weighers and so on.
Rotating torque sensor is a newly developed hit-item. It is used to test rotational parts such as motors and engines.
Above mentioned Weighing indicators, Force indicators, Loadcells and Torque meters make up the majority of our sales.
In addition, Unipulse has CMS (Cart management system) business as well.
CMS (Car management system) is a sorting system used for logistics, our technology is leveraged for a cart which has an accurate weight scale.
Our CMS enables speedy and accurate sorting by giving appropriate instructions to operators via wireless LAN.
Direct selling (without depending on trading companies) is our primary sales approach to be a close partner for our customers.
We also cover oversea market with sales office located in key countries, providing repair services and so on.
To supply and develop our new products, “UNISERVO (Geared servo motor with output torque control)” and “MoonLifter (Electric balancer)”, ROBOTEC Inc. was established.
Loadcell with high rigidity and high frequency response SCB * Capacity 100 N / 200 N / 500 N / 1 kN / 2 kN / 5 kN / 10 kN / 20 kN / 50 kN / 100 kN * The rigidity equivalent to piezoelectric sensors is achieved for a strain gauge type sensor! * Safe overload of 500％ * Easy replacement * High responsiveness
High accuracy tension / compression type loadcell USB58 * Capacity 200 N / 500 N * Accuracy 1/10000 (Non-linearity, Hysteresis, Repeatability) * High input impedance: 1050Ω * Usage: Applications in fields that require high accuracy such as calibration of testing units, in-house standard devices, etc.
Beam type loadcell Z6FC3/Z6FD1 * Capacity 5 kg / 10 kg / 20 kg / 50 kg / 100 kg / 200 kg * High accuracy, constructed of stainless steel, hermetically sealed * Stainless steel bellows that eliminate disturbance * Applications: Hopper scales, conveyor scales, etc.
3D force sensor UPP-100NX3 * Force in 3 dimensions(X, Y, Z) can be measured at the same time * Safe overload rating of 500% * The three-axis force sensor with the high sensitivity and rigidity
| |||||
 Loadcell with high rigidity and high frequency response SCB | |||||
| RM 0.00Add to Cart | |||||
 * Waveform comparison function (Sequential comparison of HI/LO limit set waveform and actual measurement waveform) * Multi-hold function (HI/LO limit comparison is made by changing the type of hold function in each divided measurement segment) * Standard equipped with displacement input (A 2-dimensional waveform comparison is possible by using both force and displacement inputs) * Save measurement data and setting values in an SD card * Easy parameter setting allowed by direct touch on touch panel * 4000 times/sec. high-speed digital processing
Digital indicator for voltage/ current output F388A * Waveform comparison function (Sequential comparison of HI/LO limit set waveform and actual measurement waveform) * Multi-hold function (HI/LO limit comparison is made by changing the type of hold function in each divided measurement segment) * Save measurement data and setting values in an SD card * Easy parameter setting allowed by direct touch on touch panel * 4000 times/sec. high-speed digital processing
LCD touch panel display digital indicator F395 * Waveform comparison function * Visibility and operability improved by application of the color LCD and touch panel * Communication function with control of sampled waveform uploaded to PC by spreadsheet software * High-speed digital circuit with processing capability of 4000 times/sec. (max) * 20 types of hold modes including peak, valley, relative maximum value, relative minimum value and inflection point are switchable by external signal
Graphic display/ touch panel type digital indicator F372A * Changes in physical quantity, that are recognizable only by numerical display, are displayed in waveform * Extensive Hold functions that enable holding an accurate point and OK/NG judgment function * Double Hold that can perform two types of Hold simultaneously, Before Value Comparison and Relative Value Comparison functions are included * Easy and simple setting operation by directly touching touch panel * Compact square DIN 96 size * High-speed digital processing capability of 2000 times/sec.
Graphic display/ touch panel type digital indicator for voltage and current output F377A * Directly connectable to Voltage±10V, Current±20mA * Changes in physical quantity, that are recognizable only by numerical display, are displayed in waveform * Extensive hold functions that enable holding an accurate point and OK/NG judgment function * Double Hold that can perform two types of Hold simultaneously, Before Value Comparison and Relative Value Comparison functions are included * Compact square DIN 96 size * High-speed digital processing capability of 2000 times/sec.
Compact DIN 96 x 48 mm Size Digital Indicator F331 * Convenient DIN 96 x 48 mm size that can be easily mounted on control panel * Standard built-in USB interface * Special PC application software * High-speed digital processing capability of 300 times/sec * Equivalent input calibration function
2 channel input type DIN96□ size digital indicator F350 * Calculation and judgment outputs are available for 2ch input values of strain gauge type sensors * Calculation functions (ch1+ch2, ch1-ch2, |ch1-ch2|, High select, Low select) * 9 points of judgment outputs are equipped * Sampling speed as high as 3000 times/sec. on each channel * Equivalent input calibration function enables calibration only by key-inputting the rated value of a sensor * Analog monitor output
Digital indicator with fast peak hold function F325 * Fast analogue peak hold * Digital peak/sample hold * High-speed digital circuit with processing capability of 3000 times/sec. * You could chose either RS-485 ( Modbus-RTU /UNI-format) or SI/F(Unipulse original serial interface) as a standard interface * The high-performance filtering functions by using both analogue and digital technology * Free software for parameter setting is available
Compact square DIN 96 type digital indicator F340A * Analog peak hold function providing high-speed peak hold * Digital zero function for one-touch zeroing of indicated value * Compact square DIN 96 size * High-speed HI/LO limit comparison function * Equivalent input calibration function enables calibration only by key-inputting the rated value of a sensor
Digital indicator for OMRON SYSMAC CJ1/CJ2/NJ F130 * Direct connection to OMROM SYSMAC CJ1/CJ2/NJ network system * High-speed sampling of 3000 times/sec. * Completely seamless communication between CJ1/CJ2/NJ and F130 * System development time is reduced and maintenance management modifications and servicing are easy * With greatly simplified inter-equipment wiring, cost advantages can be expected
Portable digital inicator F490A * Lightweight design of 290g for portable use * Measurement data is recorded in CSV format in its internal memory * Recorded data can be referred to and copied via USB interface * Various display modes such as graphic display and recorded data display prepared * Multi-calibration function that allows six calibration values to be stored and read * 4 types of Hold functions can set the data observation range
Compact load cell USB converter FS10 * You can monitor the load cell outputs on PC easily * 1200 times/sec. high-speed digital processing * Pass/fail test (HH・HI・LO・LL) * Easy to perform the initial setup and calibration * Up to 10000 measurement and status data can be recorded * The module is powered by USB, and it can supply excitation voltage to the connected load cell as well
| |||||
 Compact DIN 96 x 48 mm Size Digital Indicator F331 | |||||
| RM 0.00Add to Cart | |||||
Loadcell converter LC400 * High-accuracy and high-power loadcell converter * Built-in excitation voltage. 3 levels of 2.5V, 5V and 10V DC switchable * Capacitance of excitation voltage is 120mA. Up to 4 loadcells at 350Ω/loadcell parallel-connectable * Coarse adjustment and fine adjustment are prepared for both zero adjustment and gain adjustment * Standard equipped with 4 to 20 mA current output
Loadcell converter LC240 * Low-drift and low-noise loadcell converter * Built-in excitation voltage. 6 levels of 2.5V, 2.9V, 4V, 5V, 6.6V and 10V DC switchable * Capacitance of excitation voltage is 120mA (when excitation voltage is 10V). Up to 4 loadcells at 350Ω/loadcell parallel-connectable * Coarse adjustment and fine adjustment are prepared for both zero adjustment and gain adjustment * Standard equipped with current output of 4 to 20mA
Loadcell converter LC210/LC210C/LC210AZ * Basic type loadcell converter * Compact type of 44 mm (W) x 110 mm (H) x 110 mm (D) * Simple design allows for a wide range of applications for a variety of instrumentation * Built-in applied voltage * Current output of 4 to 20mA (LC210C) * Electronic auto zero (LC210AZ)
Plug-in type loadcell converter LC1111 * High-performance compact loadcell converter * Compact size of 38 mm (W) x 50 mm (H) x 93.5 mm (D) * Built-in excitation voltage. Up to 4 loadcells at 350Ω/loadcell are parallel-connectable * Standard equipped with current output of 4 to 20mA * Simple design allows for a wide range of applications for a variety of instrumentation * For AC or DC, please specify when ordering
| |||||
 LC400 Loadcell converter | |||||
| RM 0.00Add to Cart | |||||
Our torque sensors are used to detect torque applied to rotating shafts, mainly used for testing motors, engines, and other rotary components. Those are available in wide capacity ranges from 0.05Nm to 10000Nm, and we have drip-proof type as well. We also offer various instruments for monitoring torques, including (but not limited to) a USB interface for PC connection, digital indicators to monitor torque, rotation speed, and power simultaneously, and a power and energy monitor for motor test benches.
Slip-ring-less rotating torque meter UTMⅡ ・ Slip-ring-less = maintenance-free. rotating torque meter ・ Analogue bandwidth 1kHz with high speed sampling rate of 6kHz. ・ Measurement range 0.05Nm,0.1Nm,0.2Nm,0.5Nm,1Nm,2Nm,5Nm,10Nm,20Nm,50Nm,100Nm,200Nm,500Nm,1000Nm,2000Nm,5000Nm,10000Nm ・ Noise immunity has been greatly improved.
Rotating torque meter with square drive UTM II(W)/UTM II(WR) ・ Ideal torque meter for torque monitoring of screwdriving machines and power tools such as nutrunners ・ Prevent damage due to insufficient or excessive tightening ・ Torque monitoring : UTMⅡ（W）, Torque+Angle monitoring : UTMⅡ（WR） ・ Capacity: 100Nm or 500Nm
Drip & rust proof rotating torque meter UTMV ・With the protection against rain and seawater, it can be used outside for wind and water turbine and so on. ・Capacity type: 0.1,0.5,1, 5, 10, 50, 100, 500, 1000, and 5000Nm type will be available in near future) ・ Analogue bandwidth 1kHz with high speed sampling rate of 6kHz. ・ Safe overload: 500%
Torque monitor for UTMⅡ/UTMV TM700 ・ Torque monitor for UTMⅡ/UTMV. ・ Display the curves of torque, rotation speed, and power. ・ Operation power can be supplied to the UTMⅡ/UTMV (and to the optional rotary encoder as well). ・ Enable the cogging torque measurement with UTMII/UTMV. ・ Easy connection to UTMⅡ/UTMV with one cable.
Torque monitor for UTMⅡ/UTMV TM500 * Torque monitor for UTMⅡ/UTMV * Suitable for low-speed rotation and direct-acting applications. * Data are recorded on SD cards. * Operation power source can be supplied to the UTMⅡ/UTMV. (also to an optional rotary encoder) * Easy connection to UTMⅡ/UTMV with one cable.
Portable torque monitor for UTMII/UTMV TM400 * Torque monitor for UTMⅡ/UTMV. * With the built-in battery, it can be operated even without power source. * Ideal for use with UTMⅡ (square shaft) series with the high-speed sampling at 20kS/s. * Operation power can be supplied to the UTMⅡ/UTMV(and also to an optional rotary encoder). * Easy connection to UTMⅡ/UTMV with one cable.
Torque monitor for UTMⅡ/UTMV TM301 * Torque monitor specialized for UTMⅡ/UTMV * Torque, rotation speed and power are displayed simultaneously * Hold function (Sample, Peak, Valley, P-P, Average) * Upper/lower comparators function (（ALM HI, HI, OK, LO, ALM LO) * Data storage function * Easy connection to UTMⅡ/UTMV with one cable
USB interface device for UTMⅡ/UTMV TM201 * Variations of torque, rpm, and power can be monitored and saved on PC. * Maximum, minimum, and average value can be displayed. * Measurement (numeric) data is automatically saved in CSV format. * The unit supplies operation power to UTMⅡ/UTMV. * Two cables are attached: one for UTMⅡ/UTMVand the other for PC.
| |||||
 UTMⅢ Slip-ring-less rotating torque meter |  UTMⅡ Slip-ring-less rotating torque meter | ||||
| RM 0.00Add to Cart | RM 0.00Add to Cart | ||||
Displacement measurement
Our displacement sensor product line includes capacitive type with 0.3nm resolution and non-contact fiber optic type with 3MHz bandwidth. Those are used for ultra-precision positioning, gap measurement, runout measurement, flatness measurement, vibration measurement, and more.
Differential fiber-optic displacement sensor ATW200 * Fast response up to 3MHz bandwidth * Extra-high resolution for the nanometer measurement capability * Original fiber configurations and electronics eliminate the effect of the reflectivity variation of the target surface * The variable low-pass filter is available * Easy preparation for measurement
Contactless electrostatic capacitive displacement sensor with high responsiveness PS-IA-HS * A wide variety of product lineup with standard measuring range from 30μm to 1000μm. * The sensitivity of the sensor is not affected as far as target objects are made of conductor material. * Free from the influence of surface roughness * High linearity : ±0.05% or less * High responsiveness of 5kHz
Contactless electrostatic capacitive displacement sensor PS-IA * A wide variety of product lineup with standard measuring range from 30μm to 1000μm. * The sensitivity of the sensor is not affected as far as target objects are made of conductor material. * Free from the influence of surface roughness * High linearity : ±0.05% or less * Low noise : 0.002%/FS(rms) or less * Responsiveness of 1kHz
Multichannel PS sensor PS-Ⅲ * A wide variety of product lineup with standard measuring range from 30μm to 1000μm. * The sensitivity of the sensor is not affected as far as the target object is made of conductor material. * Free from the influence of surface roughness * High linearity : ±0.05% or less * Low noise : 0.002%/FS (rms) or less
| |||||
 Digital Contact Sensor ULE-50 | |||||
| RM 0.00Add to Cart | |||||
 Sungil Flexible Coupling Shaft SDWA |  GHPC Motor Coupling | ||||
| RM 0.00Add to Cart | RM 0.00Add to Cart | ||||
 F490A Portable digital inicator |  TC80-D3V DIN rail mount torque converter with 3ch analog output | ||||
| RM 0.00Add to Cart | RM 0.00Add to Cart | ||||
| Our Agency Product Brands |